The cop,2 and cop,3 DTMF approach works
quickly, which is what I need. However, cop,2 reports "r p t e n a."
Is there any way to quiet just this response, and not the others, or perhaps substitute
"status,2?"
Thanks much all,
Bob
From: App_rpt-users
[mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Tim Sawyer
Sent: Saturday, May 27, 2017 19:56
PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users]
Temporary stop, then restart asterisk
What? That's a weird way to do it when you could just:
85 = cop,2
86 = cop,3
Besides calling scripts when you don't have to is bad form and
dangerous.
On Fri, May 26, 2017 at 10:26 AM, Bryan D. Boyle <bdboyle@bdboyle.com>
wrote:
or...assign a couple DTMF functions in rpt.conf, for instance:
85 = cmd,/etc/asterisk/scripts/enab
86 = cmd,/etc/asterisk/scripts/disa
where, in a /scripts directory under /etc/asterisk, there are two scripts as
above...
enable.sh:
#!/bin/bash
/usr/sbin/asterisk -rx "rpt cmd nodenumber cop 2 nodenumber"
disable.sh
(replace the 2 with a 3)
chmod 755 [enable.sh, disable.sh]
rasterisk
rpt reload
lots of ways to skin the cat. Remember, not only is asterisk/allstar
functionally rich...but you can also use the underlying OS to do many wonderful
and various things both to itself as well as the application. There are
no limits to the creativity...
On 5/26/2017 12:43 PM, Steve Zingman wrote:
As you said, it was when DIAL first released for the RPi so it's 1.0
>From the asterisk CLI:
rpt cmd 1999 cop 2 1999 <------------ system enable
rpt cmd 1999 cop 3 1999 <------------ system disable
______________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlin
http://lists.allstarlink.org/c
To unsubscribe from this list please visit http://lists.allstarlink.org/c
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to the
list detailing the problem.
--
--
Tim