sorry, I must not have stated this correctly.

I'm only running one EchoLink. I'm using the AllStar Echolink to login and host it. I have forwarded the ports to my PI that is running the node.

When I connect to it I'm using my Cellphone (cell network) Different ID to connect to the PI. I primarily use IAXRPT to get to Allstar but sometimes i choose Echolink.

both will timeout after a few minutes and i'll no longer be connected to the PI.

I know of other nodes in the state that do not run echolink from allstar they just run it by echolink on a computer. when i connect to them from my phone it stays connected until i tell the app to disconnect.

hope that helps.



73,
Russell Thomas, KV4S

Cell: 205.202.1701
DMR: 3101393
D-Star: KV4S
AllStar: 47923
EchoLink: KV4S-L (1003254)
HamShackHotline: 614
Web: http://KV4S.com

On Thu, Jun 21, 2018 at 4:38 PM, Jim Nessen <nessenj@jimsoffice.org> wrote:

Or use a Public echolink proxy to bypass.


Jim, K6JWN




From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Mike <mm@midnighteng.com>
Sent: Thursday, June 21, 2018 1:32 PM
To: app_rpt-users@lists.allstarlink.org
Subject: Re: [App_rpt-users] EchoLink Timer settings?
 
Without know all the details,

My guess is you are experiancing a issue we just talked about.

2 echolink connections on the same IP.

No Can Do.

See the wiki, but you need to consider any connection under the same NAT.

And your phone does not always use the connection displayed.

Try it tuning your phones wi-fi off

...mike/kb8jnm



On 6/21/2018 4:06 PM, Russell Thomas wrote:
> I've noticed when I connect to my EchoLink node on Allstar from my
> phone or with IAXRPT android app that both will disconnect after a few
> minutes if no audio. are there settings to control this?
>
> On a computer hosted echolink traditional node this doesn't happen.
>
> any ideas?
>
>
> 73,
> Russell Thomas, KV4S
>
> Cell: 205.202.1701
> DMR: 3101393
> D-Star: KV4S
> AllStar: 47923
> EchoLink: KV4S-L (1003254)
> HamShackHotline: 614
> Web: http://KV4S.com
Amateur Radio website of Russell Thomas


> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.