Hey guys... I have a fan on the transmit radio, but as I don't want to run it all the time, only when transmitting, I'm going to drive a relay from a GPIO pin off of a URI instead. I found two excellent resources as a basis for what I'm after:

http://latinovoip.net/allstar-and-the-gpio-fan-script-for-dmk-engineering-uri/

I setup the following in my node stanza:

[2376]

events = events2376

[events2376]

touch /tmp/RPT_TXKEYED2376 = s|t|RPT_TXKEYED

rm -f /tmp/RPT_TXKEYED2376 = s|f|RPT_TXKEYED

As you can see, this is pretty simple, write RPT_TXKEYED2376 when the RPT_TXKEYED variable is true, remove when false. I even checked for the presence of those variables when the repeater is keyed/active from doing a "rpt showvars 2376":

as2376*CLI> rpt showvars 2376

Variable listing for node 2376:

XX_RPT_TXKEYED=1

RPT_ETXKEYED=1

RPT_TXKEYED=1

RPT_RXKEYED=1

RPT_NUMLINKS=0

RPT_LINKS=0

RPT_NUMALINKS=0

RPT_ALINKS=0

RPT_AUTOPATCHUP=0

-- 9 variables

Everything suggests this should work, but it is not for whatever reason, which leads me to two possible guesses:

- the logic is not placed correctly where it needs to be in rpt.conf

- chan_voter does not talk to the event management subsystem

Any ideas? Kinda lost...

Thanks,

Stephen

K1LNX