ah, got it.  857 should work though as the radios are supposed to be internally identical.  I believe they use the same cat command set.

Eric

On Sat, Feb 23, 2008 at 1:16 PM, Stephen Rodgers <hwstar@rodgers.sdcoxmail.com> wrote:
Nope. It's an FT-897.

Steve.



Eric Fort wrote:
> Steve,
> What radio is your hf remote????  Thouhght you were running a ft857??
>
> Eric
>
> On Sat, Feb 23, 2008 at 10:46 AM, Stephen Rodgers <
> hwstar@rodgers.sdcoxmail.com> wrote:
>
>> Yes and no. For a audio and keying there will probably be no issues. For
>> control of frequency and mode, you'll need to purchase the Yeasu CT62
>> RS-232 adapter cable.
>>
>> Please also note that we have never tested app_rpt with an FT857 so we
>> can't tell you for certain that app_rpt will work with it or not.
>>
>>
>> Steve.
>>
>>
>> Will wrote:
>>> Hello to the group,
>>>
>>> I would like to wire the URI up to my Yaesu FT857D and would like to
>>> here any comments concerning the wiring diagram posted on the FT897.
>>> Could one use the wiring diagram replacing the PCI radio interface
>>> points for the URI  points?
>>>
>>> Will / W4WWM
>>> _______________________________________________
>>> App_rpt mailing list
>>> App_rpt@lists.illiana.net
>>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>>
>> _______________________________________________
>> App_rpt mailing list
>> App_rpt@lists.illiana.net
>> http://lists.illiana.net/mailman/listinfo/app_rpt
>>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> App_rpt mailing list
> App_rpt@lists.illiana.net
> http://lists.illiana.net/mailman/listinfo/app_rpt

_______________________________________________
App_rpt mailing list
App_rpt@lists.illiana.net
http://lists.illiana.net/mailman/listinfo/app_rpt