RTCM GPS 18x LVC 6 GRX <-- Rx Data 6 Green 7 GPPS <-- Pulse Output 1 Yellow 8 GND Ground 3 Black 8 GND Ground 5 Black 13 +5V --> Vin 2 Red 14 GTX --> TX Data 4 White
Thanks, Do you think I am right on the everything else, the GRX and the GTX ( does rx connect to tx or does rx connect to rx)--On Fri, Dec 18, 2015 at 1:51 PM, Steven Donegan <donegan@donegan.org> wrote:The GPPS is likely designed to connect to a GPS Pulse Per Second - which is likely the measured pulse thing...Caveat - I know nothing about the RTCM, but I do know some about interfacing GPS modules for other purposes.
From: Skyler F <electricity440@gmail.com>
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Friday, December 18, 2015 12:47 PM
Subject: [App_rpt-users] Garmin GPS 18 LVC RTCM wiring
_______________________________________________I am now going to solder the Garmin 18x GPS to the DB15 connector for the RTCM.I am a little confused by the labels so is this pinout correct?RTCM --- GPSGRX ----- TXDGPPS ----GND ------ GND+5V ----- Input VoltageGTX ----- RCVRST -----Is this correct? There is also a "measurement Pulse Output" wire, but I don't know what to do with that.Garmin GPS 18 wiring
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.