Hi Stephen,

That's how I have my 7330 interface set up:

duplex = 0
linktolink = yes                       
hangtime = 0                           
althangtime = 0

I think ikt's working as expected. 

73,

  Dave
  WA1JHK

On 8/29/2018 6:52 AM, Stephen - K1LNX wrote:

Hi guys, 

     I recently re-built the node that interfaces to my controller, and one of the things I noticed after re-building it that there was a fairly long hang time, anywhere from 5-10 seconds. 

I have the following set, and unless I'm misinterpreting how this is expected to work, could this be a potential bug? 

duplex = 0 

;0 = Half duplex with no telemetry tones or hang time.

linktolink = yes                        

; disables forcing physical half-duplex operation of main repeater while

; still keeping half-duplex semantics (optional)

I am still testing, but setting the the hang time to "0" appears to have fixed it, I also tried setting other params to "0" in the wait-times section: 

hangtime = 0                            

; squelch tail hang time (in ms) (optional, default 5 seconds, 5000 ms)

althangtime = 0                         

; longer squelch tail

[wait-times]

telemwait = 0                            ; Time to wait before sending most telemetry

idwait = 500                              ; Time to wait before starting ID

unkeywait = 0                           ; Time to wait after unkey before sending CT's and link telemetry

calltermwait = 0                        ; Time to wait before announcing "call terminated"

Anyone else run into this, or is this working as expected? Hardware is a Raspberry Pi 3 B+ and Repeater Builder RIM "lite" SCOM interface. 

73

Stephen 
K1LNX

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

Virus-free. www.avast.com

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.