My understanding is that Dahdi replaces zaptel on the new kernels. If you read the docs on Dahdi it says to remove all zaptel stuff.
On 1/27/15, 2:50 PM, Steve Zingman wrote:
I would put the files in anyway. Zaptel or not unless there is a dahdi version the kernel module may still be looking for the file.
On 1/27/2015 2:35 PM, Bryan Fields wrote:
No, this is a 3.2 kernel (needed it for the server) so it's dahdi, my old box is running the old stable debian, and its the zaptel drivers which work.
I'll update in a few once I get in front of a pc
On January 27, 2015 2:19:24 PM EST, Steve Zingman <szingman@msgstor.com> wrote:The node I am running a PCI card is still Squeeze, so it's zaptel but,
Are the config files for the PCI card installed?
zapata.conf in /etc/asterisk
zaptel.conf in /etc
also try to add "options pciradio debug=1" in /etc/modprobe.conf
longshot, but worth asking.
Steve
On 1/27/2015 2:08 PM, Bryan Fields wrote:
Pciradio. I am going to write a longer bug report once I pull it into gdb later today
On January 27, 2015 2:00:59 PM EST, Steve Zingman <szingman@msgstor.com> wrote:Bryan, Do you get the crash when you start dahdi or when you modprobe pciradio? Steve On 1/27/2015 9:51 AM, app_rpt-users-request@ohnosec.org wrote:Message: 2 Date: Tue, 27 Jan 2015 03:38:27 -0500 From: Bryan Fields<Bryan@bryanfields.net> To:"app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes on a PC) Message-ID:<54C74E83.60203@bryanfields.net> Content-Type: text/plain; charset=ISO-8859-1 On 1/27/15, 1:04 AM, Doug Crompton wrote:I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1+2.10.0.1) and applied the patches from ohnosec svn. hunk 3 on patch 2 needed to be applied by hand, the rest went fine. Dahdi is compiled and installed. I have the ohnosec svn asterisk compiled as well. Copied the sounds in place and started to configure asterisk. I've run into a bit of a problem while loading the pciradio module however. I don't know enough about kernel coding in linux to know where to begin debugging this. does your version of dahdi on the hamvoip.org site work ok? perhaps it's new bug in the Digium code, and I should go with yours in place of it.Bryan, Yes you will need Dahdi source. You need to remove Zaptel stuff. I would suggest getting it from the BBB image at hamvoip.org. It already has the Allstar patches in it. It is located in /usr/src/utils/dahdi-linux-complete-2.9.1.1+2.9.1 If not you need to download that version of the code from Digium and apply the patches from the Allstar svn site.
--
Bryan Fields
727-409-1194
http://bryanfields.net
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
--
Bryan Fields
727-409-1194
http://bryanfields.net
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic