Tim,

 Thanks. I may try that but personally I think FIOS is a mess. I was looking at the possibility of using another router and I am sure glad I decided to go with Comcast at both my locations. Zero Internet problems and I use my own routers. FIOS is so intertwined with the TV and Internet service that trying to use your own router is a real hassle and in most cases causes a loss of some FIOS capability. The TV depends on the Internet for the guide and other screwy things. Having talked to someone in our club that works for Verizon and is involved in FIOS it seems it is a money loser for them and they are not doing any new system installs. Perhaps that is a good thing!

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: tim.sawyer@mac.com
Date: Sat, 11 Jan 2014 09:49:45 -0800
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Incoming connects

In IAX.conf set the port like this:

        

; Inter-Asterisk eXchange driver definition
;
;

[general]
bindport=4568
bindaddr=0.0.0.0    

bindport has to be above bindaddr. 

Then on the allstarlink.org site in the server network config set the port there. Restart asterisk, give it 30 mins to propagate and test again.
--
Tim
:wq

On Jan 11, 2014, at 9:22 AM, Doug Crompton <doug@crompton.com> wrote:

What is the procedure to change the port. I don't see a place in the server config to do this?? I know the bindport in iax.conf but where is the different port setup at allstarlink.org?

What is the significance of the last few sentences of this help text where it says about a small number of nat.....     Does this apply?

 http://ohnosec.org/drupal/node/66


73 Doug
WA3DSP
http://www.crompton.com/hamradio


Subject: Re: [App_rpt-users] Incoming connects
From: tim.sawyer@mac.com
Date: Sat, 11 Jan 2014 07:17:11 -0800
CC: app_rpt-users@ohnosec.org
To: doug@crompton.com

Not that I have seen. Mine just works. It would be worth a try to move the port as it’s easy to do. 
--
Tim
:wq

On Jan 10, 2014, at 9:29 PM, Doug Crompton <doug@crompton.com> wrote:

Is there a setting on this router for persistent NAT?


_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users