The command complete (touch tone accepted) beep is different from the courtesy tone. Is the beep the same as the courtesy tone?

A common reason for no touch tone decoding with a simplex node is when the node is in (the default) full duplex. Be sure you have a duplex=0 statement in (usually near the top) your node stanza.

On Wed, Jul 11, 2018 at 11:39 AM Jay Poulos <osu49er@gmail.com> wrote:

I have a simplex node setup with a Baofeng 888. I receive ok (the periodic automated date and time) but when I transmit a command, I just hear a beep. On the Node Status page the "Total Keyups" increments each time I attempt to send a command. However, the "Total Commands Executed" remains at 0. "Total Timeouts" is also 0. It's as if the command is being received but not interpreted correctly? Any ideas?

Thanks,
Jay
KI7SOX
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.