While I can't say for sure, I can only speak of my experiences...

When it fails to get download of config files from allstar,

I found it is connectivity problems coming from:
Failure of ip/gateway/dns  -And that could be more in proper recognition of your nic?

I have found it best to run the set-up using DHCP for your server set-up during install
AND
use a DHCP assignment in your router using MAC address to assign a permanent IP at the router.

This way you get the static IP using DHCP. And you can set your udp port forwarding accordingly.

This means you do not have to have knowledge of all the network config files for editing that get bug'd up when you switch from dhcp to static during the install.

It eliminates all the little bugs that add up to a hassle.
That may help some of you but I can't say what individual problems each of you might have.

...mike/kb8jnm






-------- Original Message --------
Subject: [App_rpt-users] looks like I'm not alone on this one...
From: Greg <kb1ncj@gmail.com>
Date: Mon, May 05, 2014 11:59 am
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>




-------- Original Message --------
Subject: Re: [App_rpt-users] nodesetup
Date: Mon, 5 May 2014 09:42:34 -0600
From: James H Vernetti <wd0ekr@msn.com>
To: Greg <kb1ncj@gmail.com> 


I am having the exact same problem

Jim wd0ekr




----- Original Message ----- 
From: "Greg" <kb1ncj@gmail.com>

To: <app_rpt-users@ohnosec.org>

Sent: Monday, May 05, 2014 6:30 AM

Subject: [App_rpt-users] nodesetup



> I am trying to install a new set up for a hub only server. I new
> installed but the setup in downloading the configuration from allstar
> site fails. I try running nodesetup.sh afterwards and still says failed
> to download your configuration. The login to the portal works and shows
> my 2 nodes as available to configure with when I run the script. I am
> clueless how to get around this. Any help appreciated.
> 73
> Greg
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.
>


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.