Corey,
Make sure you have dnsmgr.conf in /etc/asterisk. you can add it by:
As root
cd /etc/asterisk
wget https://github.com/AllStarLink/DIAL/raw/master/configs/dnsmgr.conf
restart asterisk

What does iax2 show registry say?

73, Steve N4IRS

On 11/18/2017 03:41 PM, Corey wrote:
Good afternoon all,
My nodes no longer register automatically since I moved over to a PI DIAL setup. I have to issue a IAX2 reload command whenever the pi is rebooted or I restart the asterisk service. 

Any advice on what I need to do to automate the registry is appreciated.

Have a great day,

Corey


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.