Bryan,

Stop asterisk:
service asterisk stop

Verify asterisk is stopped:
ps ax | grep asterisk If you see  /usr/sbin/asterisk it is not stopped
 killall -9 asterisk
ps ax | grep asterisk If you see  /usr/sbin/asterisk it is not stopped

Change compiler setting:
cd /usr/src/astsrc-1.4.23-pre/asterisk
make menuselect
select  10. Compiler Flags
select 6.  RADIO_RELAX set to taste
x
make
make install

service asterisk start

73, Steve N4IRS


On 2/16/2016 9:33 AM, Bryan Taylor wrote:

Hello all, 

Have several nodes running on allstarlink, some x86 and some raspberry pi2's.  I have noticed the false dtmf issue on each node and would like to recompile app_rpt to set the radio relax feature accordingly to reduce/eliminate the false dtmf tones that get decoded from voice transmissions.  All nodes are running the latest dial installation, does anyone know the correct procedure to do this on a dial system?

Thanks
Bryan
Vo1mxz
Sent from my iPhone 6

On Feb 15, 2016, at 12:34 PM, Kevin Custer <kuggie@kuggie.com> wrote:

This is now answered in the DIAL FAQ:

http://docs.allstarlink.org/drupal/node/170

Kevin


On 2/15/2016 9:54 AM, Steve Zingman wrote:
Jim,
Any node can be a "HUB" A node is not limited to one connection. There may be hardware limitation about the number of connections a given piece of hardware and internet connection can support. Typically, a HUB is located on a higher bandwidth internet connection and is running a more "stout" piece of hardware. A HUB usually does not have a node radio connected to it, but there is no reason it can't. A HUB usually runs DAHDI/pseudo for it's rxchannel.

As a example HUB 2100 is running on a decent internet connection and decent hardware. We are running the beta test of the DMR <---> AllStar gateway on it so it has a NW Digital DV3000 connected and is using chan_usrp instead of pseudo for it's rxchannel.

Hope this helps.

73, Steve N4IRS

On 2/14/2016 5:24 PM, Jim Aspinwall wrote:
What if anything are the specific differences between a single node (tied to simplex, repeater, Pi box and headset...) that can presumably only accept one in-bound call/connect, and a hub, to which many can connect and bridge through/over?

Given a certain amount of specialization or purpose/interest-built hubs I am interested in having a purpose-built hub for a few systems and users not exclusive but so as not to impose on others' hubs and traffic.

What does it take to do this?

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.