Now i tried 3 different computers with 2 URI-Boards and 3 installs

- SQL detect by DSP -> ok

- DTMF reading -> ok

- Transmitting by PTT -> ok

- Sending audio -> NO

I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 -> no nothing L L

Von: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] Im Auftrag von kk6ecm
Gesendet: Dienstag, 3. Juni 2014 14:11
An: App_rpt-users@ohnosec.org
Betreff: Re: [App_rpt-users] no audio from URI

Again, I'm not sure if it is your issue, but the chipset used in your board is of the same family as the one I seemed to have difficulty. When I chose a board with an older generation chipset (NM10, and not the 7x series), the audio worked good.

Thanks,

Bob

kk6ecm

Sent from iPad

On Jun 3, 2014, at 4:19 AM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:

i take this box

http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/dc3217iye-product-brief.pdf

73 de tom dh6mbt

---

Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von kk6ecm [kk6ecm@gmail.com]
Gesendet: Dienstag, 3. Juni 2014 12:59
An: App_rpt-users@ohnosec.org
Betreff: Re: [App_rpt-users] no audio from URI

I'm not sure of your issue, but your experience sounds like mine when I attempted to use a computer with a newer chipset, incompatible withe CentOS 5.10. That was Intel chipset NM 70. When I used a mother board with the older Intel chipset NM 10, I hade no audio issues. I discovered the issue when using DMK Engineering uridiag software on the ACID build (see URI FAQ on the DMK website re uridiag and loopback testing).

Thanks,

Bob

kk6ecm

Sent from iPad

On Jun 2, 2014, at 11:01 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:

good morning,

i connect a headphone to the URI so we don`t need to search the problem on the Motorolas....

73...

---

Von: David Morley [ab8tn1@cox.net]
Gesendet: Dienstag, 3. Juni 2014 07:14
An: torben@klimt-online.com
Betreff: Re: [App_rpt-users] no audio from URI

Are the GM 360s the same as the GM 300s?  Do they have 16 pin connectors 

Sent from my iPhone

On Jun 2, 2014, at 2:07 PM, "torben@klimt-online.com" <torben@klimt-online.com> wrote:

Hi all,

i think i have a little blackout L

I would like to set up a repeater with 2 GM360

<!--[if !supportLists]-->- <!--[endif]-->SQL detect is ok

<!--[if !supportLists]-->- <!--[endif]-->NF to another connectet repeater is ok

<!--[if !supportLists]-->- <!--[endif]-->DTMF is ok (looks good on console)

<!--[if !supportLists]-->- <!--[endif]-->PTT is ok

BUT there is no audio out from the URI on Port 22 and or 23 L

On a windows machine the URI works fine but on the asterisk there is no output

Any ideas ?

greetings

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.