You also need to do this to get into your winscp if you are using it.This is after you have enabled root
nano /etc/ssh/sshd_config
Scroll down to ....
Permit root login yes
Don't forget to uncomment out the # before the word "Permit"
PeteKD2ARB
On Mon, Sep 3, 2018 at 13:19, Bob Pyke<k6ecm1@gmail.com> wrote:You have to set one; “sudo” into root, then generate a new root password.
Thanks,
Bob
K6ECM
Sent from iPad
> On Sep 3, 2018, at 9:58 AM, REDBUTTON_CTRL <jrorke@cogeco.ca> wrote:
>
> Hi All, trying to set up a new RPI node. Using latest rpi Dial release. But need the default root password. Doesn't seem to be listed on the Allstar wiki.
> the one for Repeater is listed but not root.
>
> Anyone point me in the right direction?
>
> Cant proceed with configuring my node until I have rot password.
> Used to be debian but I guess it was changed since the last release.
>
> Thanks,
>
> Jon RQ
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.