Thanks Keith.
 
with your info I was able to fix my problem..
 
it had to do with the use of / when \ was to be there..
 
Duh.. sometimes.. I wonder how I can drive to the office with out killing myself Clignement d'œil
 
 
 
Sent: Thursday, October 01, 2015 11:31 AM
To: Pete M
Subject: Re: [App_rpt-users] think I asked wrong..
 
Hi Pete,

I'm familiar with Nodeshark.

You just need to go to Edit->Preferences->Target and set Archivedir to the parent folder of the node number folder. For example, in my case, I use "c:\qso". The Archivedir setting would point to that folder. Underneath that folder, I have a folders "2541" and "27380" which are my Allstar Node numbers. Note that you point Archivedir to the "c:\qso" and not the node number sub-folder. Nodeshark will populate the Node pulldown list with the sub-folder names. That takes care of the Archivedir setting.

Then you go Edit->Preferences->Backup and set the IP address of your Allstar system, the SSH port number, login, password, remote path, and local path. As before, local path will be (in my case) "c:\qso". Remote path is set exactly the same as you have set "archivedir" in rpt.conf.

At this point you should be good. Click "OK" and then be sure to do File->Save Preferences. Quit Nodeshark and restart it.

All of this info and a lot more is in the Nodeshark User's Guide v0.95 on the Nodeshark Download page. For instance, in the UG, I highly recommend you first get PuTTY's PSCP working between your Windoze system and the Allstar system. Nodeshark uses PSCP to do the sync (and remote command execution) and there are a few potential gotcha's with getting PSCP setup the first time (e.g. the Win PATH variable).

I should probably re-zip the Nodeshark v0.96 archive to include the Nodeshark v0.95 Users Guide. I did all this stuff a number of years ago when we were all more Internet bandwidth conscious and the UG is a whopping 1.2MB! ;^)

73's,

Keith
KF7DRV
Allstar: 2541

 
On Thu, Oct 1, 2015 at 5:45 AM, Pete M <petem001@hotmail.com> wrote:

Ok I am now recording all traffic.. this will help I am sure..

Node shark wont sink but if I download both node directory and open the directory where both are stored.. I can see the logs..

anyone have some experience with node shark?

I think that I just need some pointers on the path. think this is my problem.

cause for password and user it is obvious, for ip adress I hope it also work with my no-ip domain name..

Thanks for every one help..

on the DDDF things, I and another guy are working on  small design based on an atmel. zero crossing circuitry and 8 natenna switching all controled by the atmel.. that way with the pulse from the zero crossing circuit we will calculat the bearing with a 2-3 degree accuracy.. maybe more..

for the radio we will use those:  http://www.dorji.com/docs/data/DRA818V.pdf for vhf
and those for uhf http://www.dorji.com/docs/data/DRA818V.pdf

When the whole project will be done We will make it available to all with source and schematics.






_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.