Thanks... for clarification, I have 5 static IP's from my provider. 4 of them live on one router (an atom based server running pfSense), the .196 sits on a seperate wireless router, completely isolated from everything else. It was cabled to that previously, but I moved it off of there as it was only there for temporary testing.
> Did you configure the allstarlink server that you are using 4570?
Yes, in the networking config section of the portal the port is set to 4570 and I have "custom (IP config set on VoIP server)" set in the dropdown menu. My theory is that once I have registered on the new IP it should have updated accordingly, I have restarted asterisk, rebooted, etc. and no luck :/
My guess at this point is maybe that it's cached at the allstar server end and expires after a pre-determined length of time when an IP changes. Still can't put a finger on the port thing though...
As for the public router address that would something to take up with your ISP. I would check it by using http://whatismyip.com.
Here is my registry. I do use 4570. Did you configure the allstarlink server that you are using 4570?
asl2063*CLI> iax2 show registry67.215.233.178:4569 N 2081 72.67.127.136:4570 60 Registered
Host dnsmgr Username Perceived Refresh State
67.215.233.178:4569 N 2080 72.67.127.136:4570 60 Registered
67.215.233.178:4569 N 2064 72.67.127.136:4570 60 Registered
67.215.233.178:4569 N 2063 72.67.127.136:4570 60 Registered
DavidOn Tue, Mar 22, 2011 at 8:18 PM, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
That's part of my issue, my 70.90.228.196 address is on an entirely different router, I am attempting to use 70.90.228.195 as my registered address, and unless I'm not looking at it correctly it is using port 4569 instead of 4570. If someone attempts to connect to me it will fail in it's current state.
On Tue, Mar 22, 2011 at 8:10 PM, David KE6UPI <dshaw@ke6upi.com> wrote:Well the server you are connected too is using port 4569. I bet if a node connect to you they would use port 4570.
DavidOn Tue, Mar 22, 2011 at 7:47 PM, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
_______________________________________________Ok... where am I going wrong? Running ACID, self managed server (not portal managed) and I can not get Asterisk to register to the registration server correctly. I am attempting to use port 4570 and set bindport=4570 in iax.conf.
If I do an iax2 show registry:
allstar*CLI> iax2 show registry
Host dnsmgr Username Perceived Refresh State
67.215.233.178:4569 N 2335 70.90.228.195:4569 60 Registered
It show registered, but not on the correct port ???
I also show the entry in /var/lib/asterisk/rpt_extnodes to be incorrect, it shows the IP I was previously using:
[root@allstar asterisk]# cat /var/lib/asterisk/rpt_extnodes | grep 2335
2335=radio@70.90.228.196:4570/2335,70.90.228.196
Anyone have any ideas? I've been off the air for a while due to hardware issues, and these configs were working previously, but it's probably been a year or more.....
tnx and 73,
Stephen
--
****************************************
Stephen Brown - ARS K1LNX
Johnson City, TN EM86
http://www.k1lnx.net
Allstar Link: 2335
IRLP: 4829
PSTN: 423-665-9367
SIP: k1lnx@k1lnx.net
****************************************
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
--
****************************************
Stephen Brown - ARS K1LNX
Johnson City, TN EM86
http://www.k1lnx.net
Allstar Link: 2335
IRLP: 4829
PSTN: 423-665-9367
SIP: k1lnx@k1lnx.net
****************************************
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users