Well Marco,
I may not have a good answer for you but a answer.
It seems you are trying to 'roll your own' on a Pi.
I don't think I can help with those OS choices on a Pi. Unknown
to me.
You are no doubt suffering from the lack of sound support in your system.
Same as our default image if you do not put a hold on the kernel headers before updating.
(yes we are using older versions of the kernel till a fix come for sound support)
I can only suggest you use the SD burnable image file located
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/
and follow this guide
However, if you really want to keep pushing forward from where
you are, I suggest this read.
http://enhanced.github.io/2018/08/ASL_With_ALSA
But the question is still out there if someone has got this to work on your OS. So perhaps a better answer will come.
...mike/kb8jnm
Hi Mike, thanks for the answer. I started with install armbian on banana m2+ (Linux ir0uas_uhf 3.4.113-sun8i #68 SMP PREEMPT Wed Sep 19 10:23:30 CEST 2018 armv7l GNU/Linux), after that I had following this instruction: cd /tmp wget http://dvswitch.org/install-allstarlink-repository chmod +x install-allstarlink-repository ./install-allstarlink-repository If Raspbian: apt-get install raspberrypi-kernel-headers -y Otherwise: apt-get install linux-headers-`uname -r` -y apt-get update apt-get install allstarlink -y At the end of the installation process, I started the configuration with the help of startup script. Attached you can find the configuration files. 73 Marco IW0RED. On Mon, Dec 3, 2018 at 1:06 AM Mike <mm@midnighteng.com> wrote:Marco, I can't make heads or tails of your log. Perhaps just state what you want to have when done with your server, what you have completed, and what is not working. Be sure to mention the hardware PC or Pi etc usb/radio ports etc. Probably would not hurt to attach your rpt.conf file with your question by the looks of the log. ...mike/kb8jnm On 12/2/2018 10:13 AM, Marco Brunozzi wrote:Hi everyone, I trying to setting up my first asl node. I don't have experiences in this years I had work with svxlink. The migration it's very hard. :-) Below the asterisk log. Thanks in advance. 73 Marco IW0RED. pbx_config.so => (Text Extension Configuration) == Registered file format ogg_vorbis, extension(s) ogg format_ogg_vorbis.so => (OGG/Vorbis audio) == Registered channel type 'rtpdir' (RTPDIR Ham Radio Bridging Driver) chan_rtpdir.so => (RTPDIR Ham Radio Bridging Thingy) Asterisk Ready. -- Loading initial config for repeater 28163 [Dec 2 15:43:32] NOTICE[1223]: app_rpt.c:22184 rpt_master: Normal Repeater Init 28163 -- Re-Loading config for repeater 28163 -- rpt (Rx) initiating call to SimpleUSB/usb_28163 on SimpleUSB/usb_28163 [Dec 2 15:43:32] WARNING[1227]: channel.c:3051 ast_request: No channel type registered for 'DAHDI' rpt:Sorry unable to obtain pseudo channel [Dec 2 15:43:32] NOTICE[1228]: chan_simpleusb.c:1534 hidthread: Assigned USB device 5-1:1.0 to simpleusb channel usb_28163 == Set device 5-1:1.0 to usb_28163 [Dec 2 15:43:32] WARNING[1228]: chan_simpleusb.c:1637 hidthread: Loaded parameters from simpleusb_tune_usb_28163.conf for device usb_28163 ._______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.