OK I was getting that impression. I have tried the password option, but the problem comes while streaming that remote base audio to the net. Until the password is entered it does not pass the audio through to the stream... We may just go back the private node option again.  Thanks for the info guys
 
Regards,
Ross kc7rjk
 
From: Tim Sawyer
Sent: Sunday, December 15, 2013 1:56 PM
Cc: App_rpt
Subject: Re: [App_rpt-users] Node filtering
 
Not limit connects per-say but you can have a login. Alison will prompt for a password when you connect. Then you would press *8xxx1 as shown in the example below.
 
See http://ohnosec.org/drupal/node/44
 
So in you rpt.conf:
[1999]
authlevel = 2 ; Remote base authentication level
 
[functions-remote]
8xxx1=remote,99,OK,E  ; Users
8xxx2=remote,99,W6ABC,E ; User W6ABC
8xxx3=remote,99,K6ABC,E ; User K6ABC
 
 
--
Tim
:wq
 
On Dec 15, 2013, at 1:24 PM, Ross Johnson <kc7rjk@comcast.net> wrote:

so I'm guessing there's not a way? Or it's so simple I missed it?
 
 
Ross


Ross Johnson <kc7rjk@comcast.net> wrote:

Hello Group,
 
I was wondering if it was possible to only allow specific nodes to connect to a remote base node???
 
Thanks Guys,
Ross
 
 
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users