On Fri, Aug 11, 2017 at 8:28 AM, Michael "Lee" Lockwood
<michael@lockwood.us.com> wrote:
>
> Just to circle back on this topic...
>
> I tried itxctcss = as both 1 and 0 and no difference on this.
>
> If I'm understanding correctly, at this point app_rpt does only transmit the "default" ctcss for the repeater tail and courtesy tone, by design.  It does not transmit the other txctcss tones in the usbradio.conf file.  I haven't misconfigured anything?

If I were designing it, I would have done it this way, so I think that
yes it is acting as designed.

However, since the itxctcss command exists, it should follow the
itxctcss command. It sounds like that piece was never implemented.
This is sort of halfway between a feature request and a bug report,
but I think it should be programmed so that when itxctcss == 1 it
operates as it does now, and when itxctcss == 0 it should operate as
you request, transmitting the input tone through the end of the
transmission.

Tom KD7LXL

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.