Hi Steve
Thanks that worked…… However now all seems to load and registers OK but SimpleUSB wont loa/run ?
return email: Bob@Fot.com.au
NODE=47324
REGPASS=47324:xxxxxx@register.allstarlink.org ; This must be changed to your node number, password
Call sign: VK6ZGN
Interface type: SimpleUSB/usb_47324 ; SimpleUSB
Echolink Callsign: INVALID
Echolink node: 000000 ASL node used:
Ping test to 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=77.5 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=70.6 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=84.1 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=84.4 ms
--- 8.8.8.8 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 70.664/79.212/84.453/5.656 ms
Ping test to register.allstarlink.org
PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.
64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50 time=209 ms
64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50 time=208 ms
64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50 time=208 ms
64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50 time=208 ms
--- register.allstarlink.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 208.471/208.709/209.006/0.220 ms
Ouput of ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.168.39 netmask 255.255.255.0 broadcast 192.168.168.255
inet6 fe80::4f:49ff:fe38:5803 prefixlen 64 scopeid 0x20<link>
ether 02:4f:49:38:58:03 txqueuelen 1000 (Ethernet)
RX packets 1641 bytes 149786 (146.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1781 bytes 554581 (541.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 33
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 16 bytes 1312 (1.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 16 bytes 1312 (1.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Output of lsmod grep dahdi
dahdi 200704 28
IAX2 registry
Host dnsmgr Username Perceived Refresh State
67.215.233.178:4569 Y 47324 58.178.114.94:64301 60 Registered
Asterisk version:
Asterisk GIT Version adaec47 built by root @ odroidxu4 on a armv7l running Linux on 2018-03-07 14:53:41 UTC
Current date and time: 2018-07-26.04:32
updatenodelist service running?
root 682 0.0 0.4 4428 2384 ? Ss 04:29 0:00 /bin/bash /usr/local/bin/rc.updatenodelist &
root 1650 0.0 0.1 3764 560 pts/2 S+ 04:35 0:00 grep updatenodelist
/tmp/rpt_extnodes-temp file
-rw-r--r-- 1 root root 0 Jul 26 04:30 /tmp/rpt_extnodes-temp
/var/lib/asterisk/rpt_extnodes file
-rwx------ 1 root root 140551 Jul 26 04:26 /var/lib/asterisk/rpt_extnodes
####### Begin warnings from messages file
[Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Loaded parameters from simpleusb_tune_usb_47324.conf for device usb_47324 .
[Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Unable to re-open DSP device 1 (usb_47324): No such file or directory
[Jul 26 04:26:42] WARNING[986] chan_simpleusb.c: Unable to re-open DSP device 1 (usb_47324): No such file or directory
And so on forever !!
####### Begin warnings from messages.1 file
73
Bob
VK6ZGN
From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman
Sent: Wednesday, 25 July 2018 17:58
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] NanoPi
Bob,
It looks like DKMS did not rebuild DAHDI properly.
Please do as root:
dpkg-reconfigure asl-dahdi-linux-dkms
reboot
Should now be fixed. Check DAHDI is running by:
lsmod | grep dahdi
73, Steve N4IRS
On 07/25/2018 04:38 AM, Bob Good wrote: