well, why dont you try something higher then 480...

---

Date: Sun, 11 Aug 2013 20:37:49 -0500
Subject: Re: [App_rpt-users] RTCM simulcast help
From: mhebert1975@gmail.com
To: telesistant@hotmail.com
CC: app_rpt-users@ohnosec.org

1) S/W Version: 1.26 08/10/2013 on both of them

2) 480 on both of them

On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com> wrote:

1) What version of RTCM firmware are you running?

2) What do you have your TxBufferLength set to (in the RTCM) ?

Jim

---

Date: Sun, 11 Aug 2013 19:43:36 -0500
From: mhebert1975@gmail.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] RTCM simulcast help

All,

I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up 

I have done a astres.sh and rebooted both RTCMs

Here is my voter.conf

[general]

port = 667

buflen = 120

password = xxx

[28304]

KD5DFB_main=xxx,transmit,master

KD5DFB_site1=xxx,transmit

Here is my menu 98 on the RTCM 

GPS Lock: 1

Connected: 1

COR: 1

EXT CTCSS IN: 0

PTT: 0

RSSI: 255

Current Samples / Sec.: 8000

Current Peak Audio Level: 1496

Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134

Current Time: Mon  Aug 12, 2013  00:40:50.800

Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec

Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec

Last Rx Pkt index: 0, inbounds: 0

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users