We had this happen once with the RPi with DIAL. Sometimes computers hang-up, and if they are in transmit mode... oh well. We are installing a simplex radio with a simple controller that will allow us to  manually reboot the processor; an independent watchdog timer would work as well, but we also want to use the controller to report temperature.

Thanks,
Bob
k6ecm
73
Sent from my iPhone

On Apr 23, 2018, at 7:22 AM, Loren Tedford <loren@lorentedford.com> wrote:

We had a scenario that occurred late Saturday night early Sunday Morning where the repeater locked its self wide open for over 18 hrs solid with no id’s according to witnesses I was away sleeping dealing with some medical on this end.. When we found out about it we immediately tuned to the frequency and found that the repeater was indeed locked open. I had Mark run out to the repeater site to shut it down and bring home the allstarlink box..

 

No signs of damage to motherboard ram or ssd we did look through the logs and couldn’t find anything that would even remotely cause a stuck ptt.. We were able to get the Archive directory downloaded since it was a separate drive and after looking through it.. Nothing showed their either..

 

Any ideas anyone? Anyone ever had this happen? This machine was Debian distro and was one of the earlier installations of the debian install .. It was up and running for almost 2 years no issues.. Reboots once every week.

 

 

 

 

Loren Tedford (KC9ZHV)
Phone Main: 1+ (631) 686 – 8878 Option 1
Fax: 1-618-551-2755
Email: loren@lorentedford.com
Email: KC9ZHV@KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.