Many ways to do the same thing.

Things to keep in mind...

One echolink connection per ip address (wan)  ex  ...kb8jnm- R
Under this config, it would be a one at a time approach.

node1  440 rptr
node2  2m repeater
node3 echilink attachment. kb8jnm - R

Node one or node 2 may connect to node 3 for echolink service...
if you connected both 1 & 2 to node 3,  it is a 3 way link.

You can get past the one echonode per wan ip by installing a app_rpt server anywhere else (at home etc with new ip) with only 1 app_rpt node with echolink attachment kb8jnm- L and connect to it when needed.
A little more latency could occur.

...mike/kb8jnm
-------- Original Message --------
Subject: [App_rpt-users] 2 Repeaters on One system
From: Loren Tedford <lorentedford@gmail.com>
Date: Fri, August 22, 2014 11:31 am
To: app_rpt-users@ohnosec.org

Hello Loren here I am looking at trying to run two separate repeaters on one system was curious how I should do this or what examples of the config files should look like one concern of mine is Echolink I already use Echolink on my 440 repeater however if I put in a 2 Meter repeater I would like to have the echo-link made available to the 2 meter repeater as well.. We all know that Echolink uses ports 5198-5200 So how does one do this when there is a two repeaters on the same computer system or Allstar system.. Also how do I edit the config files for each repeater and ensure that the URI attaches its self to the correct config file so many questions go through my mind as I look at running all this on one machine.. 

Broadcastify is another question how do I run multiple instance of Ezstream on the same system and broadcast my both repeaters out to the web.. I have the 440 repeater at moment doing this but we have also experienced issues restarting Asterisk and other things with Ezstream any thoughts?

Any advise out there would be appreciated.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.