Hello to the group,
I install Asterisk from SVN repository Ver SVN-trunk-r49321 including app_rpt using a TDM400P with 2 FXS daughter boards on a system running Suse-10.1.
I wiil use the simplex interface as described at http://www.hamwlan.net/images/FXS-SIMPLEX-RADIO-V2.jpg in order to interconnect 2 simplex UHF radio to create a network.
Using information from Francois BERGERET (f6hqz-m@hamwlan.net) and the mailing list I made adjustments to the pertinent files as follows:
# zaptel.conf
e&m=1-2
loadzone=us
defaultzone=us
Meaning 2 FXS ports configured as
E&M signalling.
;zapata.conf
[channels]
callwaitingcallerid=no
echocancel=yes
echocancelwhenbridged=yes
echotraining=no
relaxdtmf=yes
adsi=off
usercallerid=yes
callgroup=1
pickupgroup=1
group=1
signalling=em_rxtx
immediate=yes
context=radio1
channel=1
context=radio2
channel=2
Meaning 2 FXS ports signalling =
em_rxtx and immediate = yes
;rpt.conf
[1999]
; Node ID of remote base
rxchannel =
Zap/1
; Rx audio/signalling channel
remote =
y
duplex=0
context=radio1
[1900]
rxchannel =
Zap/2
remote =
y
duplex=0
context=radio2
[functions-remote]
[telemetry]
[morse]
[nodes]
1999 =
radio1@192.168.0.201/1999
1900 =
radio2@192.168.0.201/1900
[memory]
;extensions.conf
[general]
static=yes
writeprotect=no
autofallthrought=yes
clearglobalvars=no
[globals]
[default]
[radio1]
exten =>
1900,1,rpt,1900|D
[radio2]
exten =>
1999,1,rpt,1999|D
[radio-secure1]
exten =>
1900,1,rpt,1900|D
exten =>
1999,1,rpt,1999|D
[radio-secure2]
exten =>
1900,1,rpt,1900|D
exten =>
1999,1,rpt,1999|D
;iax.conf
[gui]
type=friend
context=radio-secure1
username=gui
secret=********
auth=md5
disallow=all
allow=gsm
notransfer=yes
[gui2]
type=friend
context=radio-secure2
username=gui
secret=********
auth=md5
disallow=all
allow=gsm
notransfer=yes
;sip.conf
[gui]
type=friend
context=radio-secure1
username=gui
secret=********
auth=md5
disallow=all
allow=gsm
notransfer=yes
[gui2]
type=friend
context=radio-secure2
username=gui
secret=********
auth=md5
disallow=all
allow=gsm
notransfer=yes
With the above configuration I
configure the system.
Now calling from a remote PC Using
iaxRpt the 1999 node I can connect to the radio and control it turning into
transmit mode and receiving as expected
!!!!!!!!
Calling the 1900 node I have the
following indication at the Asterisk console:
………
--Executing [1900@radio-secure1:1] Rpt(“IAX2/gui-10”, “1900|D”) in new
stack
Segmentation
fault
Xxxxxx:~
#
Questions
1.
Is something wrong with
node 1900 ? It appears to me totally similar to
1999.
2.
In addition I need a
method - configuration to have the above 2 nodes interconnected automatically
at Asterisk boot (Maybe by using MeetMe).
3.
Extending the above
requirement same need for remote running Asterisk
boxes.
Is any one to help
me?
Thanks in
advance.
Niagassas
Angelos
Project Manager
Tel. +30 210 4821492
Mob. +30 6977919262
Messenger:
niagassas@hotmail.com
eMail:
niagassas_ang@tellas.gr
