On Sun, Jan 15, 2012 at 11:00 AM, <app_rpt-users-request@ohnosec.org> wrote:

Send App_rpt-users mailing list submissions to
       app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
       http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
       app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
       app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

  1. Re: Softphone to the repeater Ports... (Michael J. Wolthuis)
  2. Error Question (Steve Agee)
  3. Re: Error Question (Jim Duuuude)
  4. Re: Softphone to the repeater Ports... (Jim Duuuude)
  5. SOMETHING WRONG WITH THE SYSTEM? (Bradley Haney)
  6. Re: SOMETHING WRONG WITH THE SYSTEM? (Matt Roberts)
  7. RTCM and CTCSS pin 4 (Shaun Rudling)
  8. Woo Hoo!! (Ron Simpson)


----------------------------------------------------------------------

Message: 1
Date: Sat, 14 Jan 2012 13:16:33 -0500
From: "Michael J. Wolthuis" <wolthui3@msu.edu>
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Softphone to the repeater Ports...
Message-ID: <4F11C681.7010507@msu.edu>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I would like to do this also.  Is there a document somewhere that shows
how to set it up for private LAN or for direct connection from a SIP
trunk?  I would like to tie my local Asterisk phone system into my
repeater, but not sure on the setup for the Allstar side.

Mike
kb8zgl



------------------------------

Message: 2
Date: Sat, 14 Jan 2012 12:55:34 -0600
From: "Steve Agee" <n5zua@earthlink.net>
To: <App_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Error Question
Message-ID: <78529FEFA05A48B5888BD153D178E546@steveea3dc3d27>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
       reply-type=original

What would cause this error to happen?

WARNING[20541] chan_usbradio.c: Error reading output space

N5ZUA


------------------------------

Message: 3
Date: Sat, 14 Jan 2012 11:08:34 -0800
From: Jim Duuuude <telesistant@hotmail.com>
To: <n5zua@earthlink.net>, app_rpt mailing list
       <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Error Question
Message-ID: <BLU155-W381A7BBF3AC08C8D163A5FB19D0@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"


USB Sucks!

> From: n5zua@earthlink.net
> To: App_rpt-users@ohnosec.org
> Date: Sat, 14 Jan 2012 12:55:34 -0600
> Subject: [App_rpt-users] Error Question
>
> What would cause this error to happen?
>
> WARNING[20541] chan_usbradio.c: Error reading output space
>
> N5ZUA
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20120114/06ec14b3/attachment-0001.html>

------------------------------

Message: 4
Date: Sat, 14 Jan 2012 11:16:44 -0800
From: Jim Duuuude <telesistant@hotmail.com>
To: <wolthui3@msu.edu>, app_rpt mailing list
       <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Softphone to the repeater Ports...
Message-ID: <BLU155-W4997D53770CD17297EA92AB19D0@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"


in your Asterisk Dialplan, you need to invoke Rpt like this:

exten => Something,1,rpt,1234|P   (for Phone with function controlled PTT)

-or-

exten => Something,1,rpt,1234|Pv (for Voice-controlled PTT)

(examples given for node number 1234)

JIM WB6NIL

> Date: Sat, 14 Jan 2012 13:16:33 -0500
> From: wolthui3@msu.edu
> To: app_rpt-users@ohnosec.org
> Subject: Re: [App_rpt-users] Softphone to the repeater Ports...
>
> I would like to do this also.  Is there a document somewhere that shows
> how to set it up for private LAN or for direct connection from a SIP
> trunk?  I would like to tie my local Asterisk phone system into my
> repeater, but not sure on the setup for the Allstar side.
>
> Mike
> kb8zgl
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20120114/d60aafa9/attachment-0001.html>

------------------------------

Message: 5
Date: Sat, 14 Jan 2012 17:02:26 -0600
From: Bradley Haney <kc9gqr@gmail.com>
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] SOMETHING WRONG WITH THE SYSTEM?
Message-ID:
       <CAPg-ThT4bf6nfK5WiBMGLoT4+T0NH-iaBQ-zCE6gZyL-g-6eog@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

My node was reachable that iam configuring all day yesterday and then today
all of a sudden it is not..   when i try to ssh into the node it says
connection refused and its not showing up on online node list online...

Do i need to re install the software?

Please help

Kc9gqr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20120114/ef6493e3/attachment-0001.html>

------------------------------

Message: 6
Date: Sat, 14 Jan 2012 18:34:33 -0500
From: Matt Roberts <n9gmr@me.com>
To: Bradley Haney <kc9gqr@gmail.com>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] SOMETHING WRONG WITH THE SYSTEM?
Message-ID: <553D277E-75D2-4DCE-B0BC-A81B8249F7B2@me.com>
Content-Type: text/plain; CHARSET=US-ASCII

What's your node number? Did you specify the correct port number when connecting remotely?

Matt Roberts
n9gmr@me.com

Sent from my iPhone

On Jan 14, 2012, at 6:02 PM, Bradley Haney <kc9gqr@gmail.com> wrote:

> My node was reachable that iam configuring all day yesterday and then today all of a sudden it is not..   when i try to ssh into the node it says connection refused and its not showing up on online node list online...
>
> Do i need to re install the software?
>
> Please help
>
> Kc9gqr
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


------------------------------

Message: 7
Date: Sun, 15 Jan 2012 03:54:23 +0200
From: Shaun Rudling <shaun@pmbnet.co.za>
To: app_rpt-users@ohnosec.org, Jim Duuuude <telesistant@hotmail.com>
Subject: [App_rpt-users] RTCM and CTCSS pin 4
Message-ID: <4F1231CF.20103@pmbnet.co.za>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I could not get my Kenwood TKR-750 to pull down the RTCM pin 4 enough to
trigger the COR. The pin4 voltage got down to 1.1v which is not enough.

I fixed this by soldering a 540ohm resister from RTCM pin 4 to ground.
It was just enough to bring it down to a switching point when the
Kenwood sensed my 88.5Hz tone.

Shaun
zr5s









------------------------------

Message: 8
Date: Sat, 14 Jan 2012 21:40:51 -0800 (PST)
From: Ron Simpson <n6gkj.cm98@yahoo.com>
To: "App_rpt-users@ohnosec.org" <App_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Woo Hoo!!
Message-ID:
       <1326606051.67097.androidMobile@web125906.mail.ne1.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

Update!

I built my local control around a Motorola Spectra DTMF Mic and a powered speaker. Finally figured out what the DMK URI needed for proper switching, faked out the levels and connected to a node for a nice check out! Talked to someone on the WinSystem who gave me a good report!? Now to clean it up and package it all together.

Spectra mics can be found easy enough. The bias circuit was taken right out if the MAXTRAC manual. Now to build a few more, thank you Jim and Dave for your help!!

73,

Ron - N6GKJ
Sent from Yahoo! Mail on Android

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20120114/45013317/attachment-0001.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 35, Issue 28
*********************************************