Announcements and telemetry are different things. Telemdeafult=0 will turn off connect and disconnect messages on the node where is it set. It has no affect on your announcements. To prevent your announcements from being heard on connected nodes use the localplay command rather than the playback command.   

73,

Allstar Admin

http://lists.allstarlink.org

On Fri, Jul 7, 2017 at 8:02 AM, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:

I have a hub node that we play announcements on 4 times a day, and sometimes there is another node south of me that will connect to it. 

Does telemetry output being turned off for the connecting node have any impact on this? He turned off telemetry on his side, (set telemdefault=0) and I sent a message as a test, but he was still able to hear it. 

Is this the expected behavior with telemetry turned off? 

tnx 

Stephen 

K1LNX

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.