G&#39;day all,<div><br></div><div>I am looking to minimise the node tail or hangtime after a transmission has ended. It currently seems to hang on for about a second or more after the transmission has ended while trying to maintain some telemetry on my node (mainly connection announcements).</div><div><br></div><div>These are some of the settings I have modified in my rpt.conf file to try and achieve zero or minimal hangtime:</div><div>duplex=1</div><div>hangtime=0</div><div>nounkeyct=1</div><div><br></div><div>I have also tried changing wait_times settings but don&#39;t seem to be able to reduce it any more than about a second in this mode.</div><div><br></div><div>I think that I am able to achieve almost zero tail by setting the following:</div><div>duplex=0</div><div>startup_macro=*933</div><div><br></div><div>I need to do some further testing, but this seems to work. I am wondering if there is a better way of doing this. </div><div><br></div><div>73,</div><div>Leighton </div><div>VK2LI </div><div><br></div><div><br></div>