It works with any usb devices as far as I know.  Usbradio gives you DSP support and SimpleUSB has no DSP support.  As long as the processor in your node has enough horsepower USBRADIO should be fine.  see this post to change from simple usb to usb radio.  http://ohnosec.org/pipermail/app_rpt-users/2011-October/003235.html


On Wed, Aug 28, 2013 at 9:52 AM, KJ6KO <kj6ko@innercite.com> wrote:
That explains a lot, except why it is even in the simpleusb.conf file in the first place.
 
I have heard that you can use usbradio.conf to drive the DMK URI but have never tried it.  Will it work then or is it a DMK thing?
 
Thanks....
----- Original Message -----
To: KJ6KO
Sent: Wednesday, August 28, 2013 8:28 AM
Subject: Re: [App_rpt-users] RXONDELAY not working?

rxondelay only works with usbradio, it does not work with simpleusb.

73 de K0JSC


On Wed, Aug 28, 2013 at 9:15 AM, KJ6KO <kj6ko@innercite.com> wrote:
simpleusb.conf
setting rxondelay=x to any number makes no difference.  Does something else need to be set for it to work?  Tried it from 2 up to 50 and no change in the actual delay.
 
Anyone?  Saw another identical post from 2011 and there was NO reply!
 
Thanks...

KJ6KO

__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users




__________ Information from ESET NOD32 Antivirus, version of virus signature database 8737 (20130828) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com