Thanks Jim…. hoping to have all this in *service* next week.

Levels still need a tweak or two. I complicated things a bunch because the repeater is a new Icom IDas digital NXDN repeater, but it's running in hybrid mode with 25khz analog and 6.25khz digital.

For now the Allstar side via the RTCM will be connected via analog, but at some point, I hope to move it to the digital side, not to do anything with the digital bitstream, more because the range of the repeater is so much greater when in digital, audio will still come out to the allstar side via analog, but decoded from digital when I get to that stage (course I have no idea if DTMF will decode when I get there or not :)…)

Alan

From: Jim Duuuude [mailto:telesistant@hotmail.com]
Sent: Saturday, June 02, 2012 12:03 AM
To: adamson_alan@hotmail.com; app_rpt mailing list
Subject: RE: [App_rpt-users] RTCM question

The RTCM requires no ports to be forwarded. If you can "surf" from the internet that
you plug the RTCM into, then you can talk from it too.

JIM WB6NIL

---

From: adamson_alan@hotmail.com
To: App_rpt-users@ohnosec.org
Date: Fri, 1 Jun 2012 23:58:45 -0400
Subject: [App_rpt-users] RTCM question

Got my RTCM working as I'd like… but had a question…

It will be up at repeater site, one that has its own internet connectivity.  That internet is *NOT* on my lan, it's on the public internet.

I understand that I need to poke a hole in my firewall for the rtcm udp port, but does the repeater site also need a hole poked in its (I'm not 100% sure if it's natted or not, but suspect it is…

The docs just mention the *server* needs, but it suggests that the RTCM does *not* need any specific incoming port access… Figured I'd check with those that may know.

Thanks in advance,

Alan

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users