"Got Root?"

How many software engineers does it take to change a light bulb?

None. It's a hardware problem.

Unix is user friendly. It's just very particular about who it's friends are.

WINDOWS: Will Install Needless Data On Whole System

MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."

On Thu, Oct 8, 2015 at 10:33 AM, Steve Zingman <szingman@msgstor.com> wrote:

Good to hear.
It might be worth documenting what needs to be installed and any tweaks that need to be done.

73, Steve N4IRS

On 10/08/2015 01:30 PM, Mark Johnston wrote:
it's streaming, I even did a reboot and it's live now - not sure what the problem was, maybe something on their end...

http://www.broadcastify.com/listen/feed/21348/web
"Got Root?"

How many software engineers does it take to change a light bulb?

None. It's a hardware problem.

Unix is user friendly. It's just very particular about who it's friends are.

WINDOWS: Will Install Needless Data On Whole System

MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."
On Thu, Oct 8, 2015 at 10:20 AM, Steve Zingman <szingman@msgstor.com> wrote:
Working as in streaming from the node or sending a audio file?
On 10/08/2015 01:19 PM, Mark Johnston wrote:
it gave me a login error

ezstream: Connection to http://audio3.broadcastify.com:80/wcms5pn74trz failed: Login failed

ezstream: Exiting ...

suddenly started working - not sure how/why though -
"Got Root?"

How many software engineers does it take to change a light bulb?

None. It's a hardware problem.

Unix is user friendly. It's just very particular about who it's friends are.

WINDOWS: Will Install Needless Data On Whole System

MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."
On Thu, Oct 8, 2015 at 10:06 AM, Steve Zingman <szingman@msgstor.com> wrote:
can you send a audio file to broadcastify with the command line below?
On 10/08/2015 01:00 PM, Mark Johnston wrote:
outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml

This just started appearing

[Oct 8 09:35:48] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:50] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:52] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:54] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:56] ERROR[695] app_rpt.c: pipe() failed!

[Oct 8 09:35:58] ERROR[695] app_rpt.c: pipe() failed!
"Got Root?"

How many software engineers does it take to change a light bulb?

None. It's a hardware problem.

Unix is user friendly. It's just very particular about who it's friends are.

WINDOWS: Will Install Needless Data On Whole System

MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."
On Thu, Oct 8, 2015 at 9:55 AM, Steve Zingman <szingman@msgstor.com> wrote:
Mark,
Your log is showing problems with sip and possibly a sound fob.
I don't think you need app_ices

Please post you outstreamcmd in rpt.conf

you may want to disable the sip changes while troubleshooting streaming.

73, Steve N4IRS

On 10/08/2015 12:13 PM, Mark Johnston wrote:
Anyone try setting this up yet?

Used to use this with ACID just fine

Installed ezstream, and Lame -

shows it's running

1124 ? S 0:00 /bin/sh -c /usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml



I enabled this module, thinking thats what it needed

load => app_ices.so ; Encode and Stream via icecast and ices

;modules.conf

autoload=no

; Applications

noload => app_adsiprog.so ; Asterisk ADSI Programming Application

noload => app_alarmreceiver.so ; Alarm Receiver for Asterisk

noload => app_amd.so ; Answering Machine Detection Application

load => app_authenticate.so ; Authentication Application

noload => app_cdr.so ; Tell Asterisk to not maintain a CDR for

noload => app_chanisavail.so ; Check channel availability

noload => app_channelredirect.so ; Channel Redirect

load => app_chanspy.so ; Listen to the audio of an active channel

noload => app_controlplayback.so ; Control Playback Application

noload => app_dahdibarge.so ; Barge in on channel application

noload => app_dahdiras.so ; DAHDI RAS Application

noload => app_dahdiscan.so ; Scan Zap channels application

noload => app_db.so ; Database Access Functions

load => app_dial.so ; Dialing Application

noload => app_dictate.so ; Virtual Dictation Machine

noload => app_directed_pickup.so ; Directed Call Pickup Application

noload => app_directory.so ; Extension Directory

noload => app_disa.so ; DISA (Direct Inward System Access) Appli

noload => app_dumpchan.so ; Dump Info About The Calling Channel

noload => app_echo.so ; Simple Echo Application

load => app_exec.so ; Executes dialplan applications

noload => app_externalivr.so ; External IVR Interface Application

noload => app_festival.so ; Simple Festival Interface

noload => app_flash.so ; Flash channel application

noload => app_followme.so ; Find-Me/Follow-Me Application

noload => app_forkcdr.so ; Fork The CDR into 2 separate entities

noload => app_getcpeid.so ; Get ADSI CPE ID

noload => app_gps.so ; GPS interface module

noload => app_hasnewvoicemail.so ; Indicator for whether a voice mailbox ha

load => app_ices.so ; Encode and Stream via icecast and ices

noload => app_image.so ; Image Transmission Application

noload => app_lookupblacklist.so ; Look up Caller*ID name/number from black

noload => app_lookupcidname.so ; Look up CallerID Name from local databas

load => app_macro.so ; Extension Macros

noload => app_meetme.so ; MeetMe conference bridge

noload => app_milliwatt.so ; Digital Milliwatt (mu-law) Test Applicat

noload => app_mixmonitor.so ; Mixed Audio Monitoring Application

noload => app_morsecode.so ; Morse code

noload => app_mp3.so ; Silly MP3 Application

noload => app_nbscat.so ; Silly NBS Stream Application

noload => app_page.so ; Page Multiple Phones

noload => app_parkandannounce.so ; Call Parking and Announce Application

load => app_playback.so ; Sound File Playback Application

noload => app_privacy.so ; Require phone number to be entered, if n

noload => app_queue.so ; True Call Queueing

noload => app_radbridge.so ; Radio Bridging interface module

noload => app_random.so ; Random goto

noload => app_readfile.so ; Stores output of file into a variable

noload => app_read.so ; Read Variable Application

noload => app_realtime.so ; Realtime Data Lookup/Rewrite

noload => app_record.so ; Trivial Record Application

load => app_rpt.so ; Radio Repeater/Remote Base Application

noload => app_sayunixtime.so ; Say time

load => app_senddtmf.so ; Send DTMF digits Application

noload => app_sendtext.so ; Send Text Applications

noload => app_setcallerid.so ; Set CallerID Application

noload => app_setcdruserfield.so ; CDR user field apps

noload => app_settransfercapability.so ; Set ISDN Transfer Capability

noload => app_sms.so ; SMS/PSTN handler

noload => app_softhangup.so ; Hangs up the requested channel

noload => app_speech_utils.so ; Dialplan Speech Applications

noload => app_stack.so ; Stack Routines

load => app_system.so ; Generic System() application

noload => app_talkdetect.so ; Playback with Talk Detection

noload => app_test.so ; Interface Test Application

load => app_transfer.so ; Transfer

noload => app_url.so ; Send URL Applications

noload => app_userevent.so ; Custom User Event Application

noload => app_verbose.so ; Send verbose output

noload => app_voicemail.so ; Comedian Mail (Voicemail System)

noload => app_waitforring.so ; Waits until first ring after time

noload => app_waitforsilence.so ; Wait For Silence

noload => app_while.so ; While Loops and Conditional Execution

noload => app_zapateller.so ; Block Telemarketers with Special Informa

; CDR

noload => cdr_csv.so ; Comma Separated Values CDR Backend

noload => cdr_custom.so ; Customizable Comma Separated Values CDR

noload => cdr_manager.so ; Asterisk Manager Interface CDR Backend

; Channels

noload => chan_agent.so ; Agent Proxy Channel

noload => chan_alsa.so ; ALSA Console Channel Driver

noload => chan_beagle.so ; Beagleboard Radio Interface Channel Driver

load => chan_dahdi.so ; DAHDI Telephony

noload => chan_echolink.so ; echolink channel driver

noload => chan_features.so ; Feature Proxy Channel

noload => chan_gtalk.so ; Gtalk Channel Driver

load => chan_iax2.so ; Inter Asterisk eXchange (Ver 2)

load => chan_local.so ; Local Proxy Channel (Note: used internal

noload => chan_oss.so ;

noload => chan_phone.so ;

load => chan_simpleusb.so ; Simple USB Radio Interface Channel Drive

load => chan_sip.so ; Session Initiation Protocol (SIP)

noload => chan_tlb.so ; TheLinkBox channel driver

load => chan_usbradio.so ; USB Console Channel Driver

noload => chan_usrp.so ; USRP Channel Module

noload => chan_voter.so ; radio Voter channel driver

; Codecs

; CODEC AUDIO QUALITY BANDWIDTH (including IP and Ethernet headers)

; ULAW best 87 kilobits per second (kbps)

; ADPCM good 55 kbps

; GSM mediocre 36 kbps

; g726aal2

; ilbc

load => codec_adpcm.so ; Adaptive Differential PCM Coder/Decoder

load => codec_alaw.so ; A-law Coder/Decoder

load => codec_a_mu.so ; A-law and Mulaw direct Coder/Decoder

noload => codec_dahdi.so ; Generic DAHDI Transcoder Codec Translato

load => codec_g726.so ; ITU G.726-32kbps G726 Transcoder

load => codec_gsm.so ; GSM Coder/Decoder

load => codec_ulaw.so ; mu-Law Coder/Decoder

noload => codec_ilbc.so ; http://en.wikipedia.org/wiki/Internet_Low_Bitrate_Codec

; Formats

load => format_g723.so ; G.723.1 Simple Timestamp File Format

load => format_g726.so ; Raw G.726 (16/24/32/40kbps) data

load => format_g729.so ; Raw G729 data

load => format_gsm.so ; Raw GSM data

load => format_h263.so ; Raw H.263 data

load => format_h264.so ; Raw H.264 data

load => format_ilbc.so ; Raw iLBC data

noload => format_jpeg.so ; JPEG (Joint Picture Experts Group) Image

load => format_pcm.so ; Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.

load => format_sln.so ; Raw Signed Linear Audio support (SLN)

load => format_vox.so ; Dialogic VOX (ADPCM) File Format

load => format_wav_gsm.so ; Microsoft WAV format (Proprietary GSM)

load => format_wav.so ; Microsoft WAV format (8000Hz Signed Line

; Functions

load => func_base64.so ; base64 encode/decode dialplan functions

load => func_callerid.so ; Caller ID related dialplan function

load => func_cdr.so ; CDR dialplan function

load => func_channel.so ; Channel information dialplan function

load => func_curl.so ; Load external URL

load => func_cut.so ; Cut out information from a string

load => func_db.so ; Database (astdb) related dialplan functi

load => func_enum.so ; ENUM related dialplan functions

load => func_env.so ; Environment/filesystem dialplan function

load => func_global.so ; Global variable dialplan functions

load => func_groupcount.so ; Channel group dialplan functions

load => func_language.so ; Channel language dialplan function

load => func_logic.so ; Logical dialplan functions

load => func_math.so ; Mathematical dialplan function

load => func_md5.so ; MD5 digest dialplan functions

load => func_moh.so ; Music-on-hold dialplan function

load => func_rand.so ; Random number dialplan function

load => func_realtime.so ; Read/Write values from a RealTime reposi

noload => func_sha1.so ; SHA-1 computation dialplan function

noload => func_strings.so ; String handling dialplan functions

noload => func_timeout.so ; Channel timeout dialplan functions

noload => func_uri.so ; URI encode/decode dialplan functions

; PBX

noload => pbx_ael.so ; Asterisk Extension Language Compiler

load => pbx_config.so ; Text Extension Configuration

noload => pbx_dundi.so ; Distributed Universal Number Discovery (

noload => pbx_loopback.so ; Loopback Switch

noload => pbx_realtime.so ; Realtime Switch

noload => pbx_spool.so ; Outgoing Spool Support

; Resources

load => res_adsi.so ; ADSI Resource

noload => res_agi.so ; Asterisk Gateway Interface (AGI)

noload => res_clioriginate.so ; Call origination from the CLI

noload => res_convert.so ; File format conversion CLI command

noload => res_crypto.so ; Cryptographic Digital Signatures

load => res_features.so ; Call Features Resource

load => res_indications.so ; Indications Resource

noload => res_jabber.so ; AJI - Asterisk Jabber Interface

noload => res_monitor.so ; Call Monitoring Resource

noload => res_musiconhold.so ; Music On Hold Resource

noload => res_smdi.so ; Simplified Message Desk Interface (SMDI)

noload => res_snmp.so ; SNMP [Sub]Agent for Asterisk

noload => res_speech.so ; Generic Speech Recognition API

[global]

/var/log/asterisk/messages;

[Oct 8 08:44:24] NOTICE[1278] cdr.c: CDR simple logging enabled.

[Oct 8 08:44:24] NOTICE[1278] indications.c: Removed default indication country 'us'

[Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring switchtype

[Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring signalling

[Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring rxwink

[Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring bindport on reload

[Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring bindaddr on reload

[Oct 8 08:44:25] WARNING[1278] acl.c: is not a valid IP

[Oct 8 08:44:25] WARNING[714] chan_sip.c: insecure=very at line 31 is deprecated; use insecure=port,invite instead

[Oct 8 08:47:46] NOTICE[683] cdr.c: CDR simple logging enabled.

[Oct 8 08:47:46] NOTICE[683] loader.c: 56 modules will be loaded.

[Oct 8 08:47:46] WARNING[683] acl.c: is not a valid IP

[Oct 8 08:47:46] WARNING[683] acl.c: Unable to lookup 'callcentric.com'

[Oct 8 08:47:46] WARNING[714] chan_sip.c: No such host: callcentric.com

[Oct 8 08:47:46] WARNING[714] chan_sip.c: Probably a DNS error for registration to 17772150287101@callcentric.com, trying REGISTER again (after 20 seconds)

[Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater Init 29626

[Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater Init 29627

[Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater Init 1001

[Oct 8 08:47:47] WARNING[722] chan_usbradio.c: Loaded parameters from usbradio_tune_usb1001.conf for device usb1001 .

[Oct 8 08:47:47] WARNING[720] chan_usbradio.c: Possibly stuck USB read channel. [usb1001]

[Oct 8 08:47:47] WARNING[720] chan_usbradio.c: Nope, USB read channel [usb1001] wasn't stuck after all.

[Oct 8 08:47:47] NOTICE[719] chan_simpleusb.c: Assigned USB device 5-2:1.0 to simpleusb channel usb29626

[Oct 8 08:47:47] WARNING[719] chan_simpleusb.c: Loaded parameters from simpleusb_tune_usb29626.conf for device usb29626 .

[Oct 8 08:47:47] NOTICE[721] chan_usbradio.c: Assigned USB device 5-2:1.0 to usbradio channel usb29627

[Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Loaded parameters from usbradio_tune_usb29627.conf for device usb29627 .

[Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Unable to re-open DSP device 2 (usb29627): Device or resource busy

[Oct 8 08:48:06] NOTICE[714] chan_sip.c: -- Registration for '17772150287101@callcentric.com' timed out, trying again (Attempt #1)

[Oct 8 08:59:15] NOTICE[673] cdr.c: CDR simple logging enabled.

[Oct 8 08:59:15] NOTICE[673] loader.c: 57 modules will be loaded.

[Oct 8 08:59:15] WARNING[673] acl.c: is not a valid IP

[Oct 8 08:59:15] WARNING[673] acl.c: Unable to lookup 'callcentric.com'

[Oct 8 08:59:15] WARNING[711] chan_sip.c: No such host: callcentric.com

[Oct 8 08:59:15] WARNING[711] chan_sip.c: Probably a DNS error for registration to 17772150287101@callcentric.com, trying REGISTER again (after 20 seconds)

[Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater Init 29626

[Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater Init 29627

[Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater Init 1001

[Oct 8 08:59:15] WARNING[718] chan_usbradio.c: Loaded parameters from usbradio_tune_usb29627.conf for device usb29627 .

[Oct 8 08:59:15] WARNING[715] chan_usbradio.c: Possibly stuck USB read channel. [usb29627]

[Oct 8 08:59:16] WARNING[715] chan_usbradio.c: Nope, USB read channel [usb29627] wasn't stuck after all.

[Oct 8 08:59:16] NOTICE[719] chan_usbradio.c: Assigned USB device 5-2:1.0 to usbradio channel usb1001

[Oct 8 08:59:16] NOTICE[716] chan_simpleusb.c: Assigned USB device 5-2:1.0 to simpleusb channel usb29626

[Oct 8 08:59:16] WARNING[716] chan_simpleusb.c: Loaded parameters from simpleusb_tune_usb29626.conf for device usb29626 .

[Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Loaded parameters from usbradio_tune_usb1001.conf for device usb1001 .

[Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Unable to re-open DSP device 2 (usb1001): Device or resource busy

[Oct 8 08:59:35] NOTICE[711] chan_sip.c: -- Registration for '17772150287101@callcentric.com' timed out, trying again (Attempt #1)

- Is there something else to enable or a better app to use, for feeding to broadcastify?

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic