It works on Limey Linux. We're using it in a number of nodes. Here's the simpleusb.conf from one of my nodes:

[general]

[usb]

pp2 = ptt
pp3= out0
pp10 = cor

eeprom=0

hdwtype=0 ; Leave this set to 0 for USB sound fobs modified using
; the instructions from usbfob.pdf. Use a setting of 
; 1 is for Dingotel/Sph interfaces.
 
rxboost=0 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed
; Set to 1 for additonal gain if using a low-level receiver output

;carrierfrom=ppinvert ; no,usb,usbinvert
carrierfrom=pp ; no,usb,usbinvert
; no - no carrier detection at all
; usb - from the COR line on the modified USB sound fob
; usbinvert - from the inverted COR line on the modified USB sound fob

ctcssfrom=no ; no,usb,usbinvert
; no - CTCSS decoding, system will be carrier squelch
; usb - CTCSS decoding using input from USB FOB 
; usbinvert - from the inverted CTCSS line on the modified USB sound fob

txmixa=voice ; Left channel output: no,voice,tone,composite,auxvoice
; no - Do not output anything
; voice - output voice only

txmixb=no ; Right channel output: no,voice,tone,composite, auxvoice
; See txmixa above.

invertptt=0 ; Invert PTT 0 = ground to transmit, 1 = open to transmit
; This is the collector lead of the 2n4401 on the modified
; usb sound fob.
; please refer to the howto for the procedure to do this.

duplex=1 ; Full Duplex
plfilter=yes

--
Tim
:wq

On Sep 4, 2012, at 7:14 PM, KB7RSI <kb7rsi@gmail.com> wrote:

Also, im not sure that this applies to limey linux.

Thanks

On Tue, Sep 4, 2012 at 7:13 PM, KB7RSI <kb7rsi@gmail.com> wrote:
Ok thanks for that info.
I guess limey does not totally support my via motherboard.
It will not address my parallel port for some reason.

Thanks again.

Harold

On Tue, Sep 4, 2012 at 5:46 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
http://ohnosec.org/drupal/node/177
--
Tim
:wq

On Sep 4, 2012, at 5:14 PM, KB7RSI <kb7rsi@gmail.com> wrote:

Hello all.
Does anyone know what the parallel port is called in dev folder in
limey linux if its even available?
Im trying to use my parallel port for keying and COR for my radio.

Thanks

Harold
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users