DMK Engineering website URI schematic says, " Note: Normally U1 (EEPROM) is not installed on PCB. If desired, connect EEPROM to radio connector J1.
----------------------------------------------------------------------
Message: 1
Date: Wed, 27 Nov 2013 13:58:48 -0500
From: pete M <petem001@hotmail.com>
Cc: <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Re?: Re: dmk uri question
Message-ID: <BAY407-EAS7839FC649927EB0A1392FA97EF0@phx.gbl>
Content-Type: text/plain; charset="utf-8"
Ok . Anyone can tell me how to find if the uri you have do have an eeprom inside aside from opening it..
--- Message initial ---
De : "Shane Morris" <edgecomberts@gmail.com>
Envoy? : 27 novembre 2013 12:14
A : "Doug Crompton" <doug@crompton.com>
Cc: "Greg" <kb1ncj@gmail.com>, app_rpt-users@ohnosec.org
Objet : Re: [App_rpt-users] dmk uri question
Can't you store an ID string in the EEPROM for identifying multiple URIs on
a system, so the computer knows which interface to activate when, which is
useful for crossband repeaters and the like.
That was my impression of why it was there - I could be way off the mark
though, and bow to superior knowledge in these matters.
On Thu, Nov 28, 2013 at 3:49 AM, Doug Crompton <doug@crompton.com> wrote:
The eeprom stores the level settings and is never necessary but might be
desirable if you are using the interface with multiple radios. You would
mount the eeprom in the connector of each radio cable and store the
settings for that radio. Then when you switched cables the settings would
follow along with it. If you are just using one radio you would not need
the eeprom and even if you were using more than one radio being without it
it would just mean you would have to run through the settings again when
you changed radios. Without the eeprom level settings are stored in a
configuration file on the computer when you run the level setting utility.
For SimpleUSB the file is called 'simpleusb_tune_usb.conf'. and it looks
like this -
[usb]
; name=usb
; devicenum=1
devstr=1-1
rxmixerset=500
txmixaset=500
txmixbset=500
The file is created by 'simpleusb-tune-menu' but you can edit it manually
if you like.
Look at the DMK website under support files and there is a description of
this. The eeprom is a common type so if you decide later you want to use it
you can buy it from Mouser or elsewhere.
*73 DougWA3DSPhttp://www.crompton.com/hamradio
<http://www.crompton.com/hamradio>*
Date: Wed, 27 Nov 2013 10:51:12 -0500
From: kb1ncj@gmail.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] dmk uri question
Looking to buy another uri. What is the advantage of the uri with
eeprom? Also if anyone has an extra they are willing to part with, let
me know..
Thanks
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20131127/a1a79385/attachment-0001.html>
-------------- next part --------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
------------------------------
Message: 2
Date: Wed, 27 Nov 2013 14:50:00 -0500
From: "Benjamin L. Naber" <Benjamin@kb9lfz.com>
To: 'app_rpt mailing list' <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] connections fail
Message-ID: <1385581800.1786.24.camel@benjamin-hp>
Content-Type: text/plain; charset="UTF-8"
lately I've been having an issue connecting to nodes, especially the
bigger ones.
I haven't been able to connect to node 2135 at all, and sometimes it
takes two or three tries to connect to node 2560.
Do these nodes have limits on incoming/outgoing connections?
No changes have been made to my node or my network in about a year.
~Benjamin, KB9LFZ
allstar node 28569
------------------------------
Message: 3
Date: Wed, 27 Nov 2013 12:28:36 -0800
From: "Marshall Oldham" <ke6pcv@cal-net.org>
To: "'pete M'" <petem001@hotmail.com>
Cc: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Re?: Re: dmk uri question
Message-ID: <002b01ceebaf$4059e380$c10daa80$@org>
Content-Type: text/plain; charset="utf-8"
The easiest way is to look at your receipt when you purchased your URI it will tell you if you purchased a URI with the eeprom option or not.
If you dont have a receipt look here at the URI FAQ's
<http://www.dmkeng.com/images/URI-FAQs.pdf> http://www.dmkeng.com/images/URI-FAQs.pdf
Pay attention to the second page about testing your URI and building a loop back cable.
Marshall - ke6pcv
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of pete M
Sent: Wednesday, November 27, 2013 10:59 AM
Cc: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Re : Re: dmk uri question
Ok . Anyone can tell me how to find if the uri you have do have an eeprom inside aside from opening it..
--- Message initial ---
De : "Shane Morris" <edgecomberts@gmail.com>
Envoy? : 27 novembre 2013 12:14
A : "Doug Crompton" <doug@crompton.com>
Cc: "Greg" <kb1ncj@gmail.com>, app_rpt-users@ohnosec.org
Objet : Re: [App_rpt-users] dmk uri question
Can't you store an ID string in the EEPROM for identifying multiple URIs on a system, so the computer knows which interface to activate when, which is useful for crossband repeaters and the like.
That was my impression of why it was there - I could be way off the mark though, and bow to superior knowledge in these matters.
On Thu, Nov 28, 2013 at 3:49 AM, Doug Crompton <doug@crompton.com> wrote:
The eeprom stores the level settings and is never necessary but might be desirable if you are using the interface with multiple radios. You would mount the eeprom in the connector of each radio cable and store the settings for that radio. Then when you switched cables the settings would follow along with it. If you are just using one radio you would not need the eeprom and even if you were using more than one radio being without it it would just mean you would have to run through the settings again when you changed radios. Without the eeprom level settings are stored in a configuration file on the computer when you run the level setting utility. For SimpleUSB the file is called 'simpleusb_tune_usb.conf'. and it looks like this -
[usb]
; name=usb
; devicenum=1
devstr=1-1
rxmixerset=500
txmixaset=500
txmixbset=500
The file is created by 'simpleusb-tune-menu' but you can edit it manually if you like.
Look at the DMK website under support files and there is a description of this. The eeprom is a common type so if you decide later you want to use it you can buy it from Mouser or elsewhere.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
Date: Wed, 27 Nov 2013 10:51:12 -0500
From: kb1ncj@gmail.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] dmk uri question
Looking to buy another uri. What is the advantage of the uri with
eeprom? Also if anyone has an extra they are willing to part with, let
me know..
Thanks
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20131127/a3e44945/attachment-0001.html>
------------------------------
Message: 4
Date: Wed, 27 Nov 2013 22:06:38 +0000
From: "Paul J. Agamata" <Sysman@Xceptions.COM>
To: "'Benjamin L. Naber'" <Benjamin@kb9lfz.com>, 'app_rpt mailing
list' <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] connections fail
Message-ID:
<ED83F1C8E2AAB348B47A8E2748E7C78B9706F7@Socrates.Xceptions.COM>
Content-Type: text/plain; charset="us-ascii"
No, we do not limit these connections. 2135 was down for a day or so while
it was transitioning to a new datacenter. You can also connect to 27084 as
well.
Regards,
_______________________________
Paul J. Agamata
WH6FM
Sysman@Xceptions.COM
Hilo, Hawaii
-----Original Message-----
From: app_rpt-users-bounces@ohnosec.org
[mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Benjamin L. Naber
Sent: Wednesday, November 27, 2013 9:50 AM
To: 'app_rpt mailing list'
Subject: [App_rpt-users] connections fail
lately I've been having an issue connecting to nodes, especially the bigger
ones.
I haven't been able to connect to node 2135 at all, and sometimes it takes
two or three tries to connect to node 2560.
Do these nodes have limits on incoming/outgoing connections?
No changes have been made to my node or my network in about a year.
~Benjamin, KB9LFZ
allstar node 28569
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3290 bytes
Desc: not available
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20131127/7d1b5829/attachment.bin>
------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 57, Issue 82
*********************************************