https://doc.pfsense.org/index.php/VoIP_Configuration

On Friday, August 22, 2014, Michael Wolthuis <wolthuis@gmail.com> wrote:

KB8ZGL*CLI> iax2 show registry

Host dnsmgr Username Perceived Refresh State

67.215.233.178:4569 N 28881 24.247.58.57:4569 60 Registered

67.215.233.178:4569 N 28241 24.247.58.57:4569 60 Registered

Mine matches for both of my nodes on that machine, which is behind my PFSense firewall. I am actually accessing it via OpenVPN right now, as the other person stated.

Mike

From: Tim Sawyer <tim.sawyer@mac.com>
Date: Friday, August 22, 2014 at 11:01 AM
To: Michael Wolthuis <wolthuis@gmail.com>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] pfsense router?

Mike,

Thanks I’ll try that as soon as the pfsense router gets reinstalled. Just for grins could you do “iax2 show registry”? Is the perceived port correct?

*CLI> iax2 show registry
Host dnsmgr Username Perceived Refresh State

67.215.233.178:4569 N 2504 108.13.3.89:4569 60 Registered

--
Tim WD6AWP

On Aug 22, 2014, at 7:56 AM, Michael Wolthuis <wolthuis@gmail.com> wrote:

Tim,
I run PFSense with many of my Allstar nodes. I have to set STATIC outbound NAT for the specific IP addresses that are Asterisk. This will cause them to not pick random ports outbound.

I am not sure what iax2 show registry does, but I could not get it to work until I put in a static NAT outbound.

Here is a copy of my outbound NAT statement for one of my nodes:

WAN 172.16.12.22/32 udp/4569 * udp/4569 WAN address * YES

I believe the key is the last YES, which is the STATIC PORT heading.

Hope that helps,
Mike
kb8zgl

From: Tim Sawyer <tim.sawyer@mac.com>
Date: Friday, August 22, 2014 at 10:52 AM
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] pfsense router?

Is anyone using a pfsense router in your Asterisk network? While app_rpt seems to work fine it shows a weird port, not 4569, with “iax2 show registry”. I assume pfsense is doing something weird with NAT that I don’t understand. Can anyone shed some light on this subject?

--
Tim WD6AWP

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.