Gosh.. gee... I would have NEVER guessed that he was asking that.....
If you adjust your LOCAL audio levels properly, THIS SHOULDNT HAPPEN!!!
In no way, shape or form, should there be a reason to have to adjust the levels
(inbound or outbound) of other Allstar links. Everyone adjusts their levels to the
same standards. That, in telecom terms, is called a VNL (Via Net Loss) plan
(for transmission levels). We have one. We use it. It works.
If what you are talking about is OTHER networks, such as connections from Echolink, TLB, etc,
that is another story......
Jim WB6NIL
From:
wd0ekr@msn.comTo:
telesistant@hotmail.comSubject: Re: [App_rpt-users] Incoming link connection volume
Date: Mon, 26 May 2014 08:50:46 -0600
I think he is asking how to adjust the audio level of the signal coming in
over the internet, I would like to know how to do that also. The local audio
levels are fine but the incomming internet audio is high
-----
Original Message -----
Sent:
Monday, May 26, 2014 8:45 AM
Subject:
Re: [App_rpt-users] Incoming link connection volume
Sounds like you dont have your rx/tx (local) levels set
properly.
Jim
> From:
kk6ecm@gmail.com>
Date: Mon, 26 May 2014 03:43:40 -0700
> To:
app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Incoming link connection volume
>
> Is
there a way to adjust the incoming volume of a connected link? Some
connections seem to over drive the transmitter? Normal repeater function works
quite well.
>
> Thanks,
> Bob
> kk6ecm
>
> Sent from iPad
>
>
_______________________________________________
> App_rpt-users mailing
list
>
App_rpt-users@ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> To
unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe or
edit options button"
> You do not need a password to unsubscribe, you
can do it via email confirmation. If you have trouble unsubscribing, please
send a message to the list detailing the problem.
App_rpt-users
mailing
list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To
unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe or
edit options button"
You do not need a password to unsubscribe, you can do
it via email confirmation. If you have trouble unsubscribing, please send a
message to the list detailing the problem.