Happy Holidays All!!

We are trying to get a node back up after reformatting the hard drive and we are not having much luck.

We are wrired according to the web site to a URI and a Motorola GM300 for a simplex node going to a repeater.

The rig: Motorola GM300

Wired as follows and verified:
Radius/Maxtrac series with 16 pin accessory
connector - Simplex - Processed audio

URI 20 - Radius 7
URI 21 - Radius 11
URI 22 - Radius 2
URI 1 - Radius 3
URI 8 - Radius 8 (COR/CTCSS Det.)

Radius Must be programmed to output COR/CTCSS det. on
pin 8 of accessory connector, and JU551 in position 'B'
(de-emphasized audio out).

We have no problem with the transmit audio, but we are unable to get any type of recieve audio into the URI unless we

we select no CTSSS tone. If this setting the COS/audio never drops at all. Says keyed up.

The radio is set for 103.5pl both transmit and receive. Here is our USBRADIO.CONF.

Any help would be appreciated.

[general]

[usb41456]

hdwtype=0

rxboost=1

txboost=1

rxctcssrelax=1

txctcssdefault=103.5

rxctcssfreqs=103.5

txctcssfreqs=103.5

;rxctcssoverride=0

carrierfrom=usbinvent

ctcssfrom=dsp

rxdemod=speaker

txprelim=yes

txlimonly=no

txtoctype=notone

txmixa=composite

txmixb=no

invertptt=0

duplex=0

rxondelay=0

rxnoisefiltype=0

eeprom=0

73 de Angelo