Eric,
A quick answer is, yes it can be done. The question is what you are trying to do. A XPR8300 can be connected to a URI just like any other Analog repeater. All the signals you need are on the 26 pin connector. In that configuration, with the repeater configured in Dynamic Mixed Mode (an option available for purchase from Motorola) DMR traffic would be repeated locally and analog traffic would go to AllStarLink. The problem with Dynamic Mixed Mode is that IP site connect is not available for DMR. This means no DMR networking, local DMR repeat only.

If you want to connect the XPR8300 in DMR mode to one of the DMR networks, DMR-MARC, DCI, or BrandMeister AND AllStarLink, there is another way. You can run a "bridge" between the XPR8300 in DMR mode and AllStarLink. There is a discussion group dedicated to that type of bridging at <https://groups.io/g/DVSwitch>

73, Steve N4IRS

On 12/10/2017 04:48 AM, Eric EG. Guth wrote:

Has anyone successfully connected and used a Motorola XPR8300 repeater with both Allstar and DMR?  We would like to install one that will do both. 

 

 

73,

 

Eric Guth

4Z1UG

Allstar: 28422

QSO Today

 



_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.