> Date: Sun, 15 Dec 2013 15:30:28 -0600
> From:
ars.w5omr@gmail.com
> To:
app_rpt-users@ohnosec.org
> Subject: Re: [App_rpt-users] Speaking of CW IDs
>
> On 12/15/2013 03:25 PM, Mike/W5JR wrote:
> > So, there is a "speed=" in the morse stanza. Does it
have a governor on it to limit the speed maximum to 20 wpm? My
entries greater than 20 make no difference. And why would I
want faster than 20 wpm you ask, my HUB nodes are only send
"ID" to web transceivers, and I would like them faster. I have
observed that at 20 wpm, there is a bit of jitter and faster
may not be possible. (An ID I built years ago had a limit on
how fast it could go before the code elements were overrun by
timing)
> >
>
> I've been meaning to ask that same question.
>
> Rules wise, since there's no CW requirement *at all* for
'any' license,
> then there shouldn't be a speed limit on how fast
repeater id's should
> be limited to.
>
> I like my code speed around 30~35wpm these days. I used
to copy NTS
> traffic at 40+wpm. 20wpm is such a '~*yawn*~' bore...
>
>
> _______________________________________________
> App_rpt-users mailing list
>
App_rpt-users@ohnosec.org
>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users