Ok this is some thing i have been wanting to do such as configuring the URI i have to discriminate the pl tones for me however I am having a very hard time to get it to cooperate correctly.. I was finally able to get my repeater backup however its letting users with no tone transmit.... Confused greatly now I am Using a URI from DMK Engneering and I do have the Duplex cable for Motorola I am using CM200 radios and the radio channel is set to open squelch at moment for testing..
here is a copy of my current config that works in usbradio.conf
;
; Usbradio channel driver Configuration File
;
[general]
[usb29925]
hdwtype=0
rxboost=1
;txboost=1
rxctcssrelax=1
txctcssdefault=141.3
rxctcssfreqs=141.3
txctcssfreqs=141.3
;rxctcssoverride=0
carrierfrom=usbinvert
ctcssfrom=no
rxdemod=speaker
txprelim=yes
txlimonly=yes
txtoctype=notone
txmixa=composite
txmixb=no
invertptt=0
duplex=1
rxondelay=0
rxnoisefiltype=0
eeprom=0
#includeifexists custom/usbradio.conf
This is my current Asterisk folder info I notice that there is no simpleusb.conf do i need this? to get it to work correctly?
[root@KC9ZHV-_R asterisk]# ls
amd.conf echolink.conf gps.conf manager.conf rpt.conf usbradio.conf
asterisk.conf echolink.old.conf iax.conf modules.conf savenode.conf usbradio.old
audio extensions.conf indications.conf msg sip.conf usbradio_tune_usb29925.conf
dundi.conf features.conf logger.conf myscripts system.conf zapata.conf
Thanks so much