Why dont you try that from the Asterisk CLI???

(do "asterisk -r" from the Linux command line)

Jim

Date: Mon, 19 Aug 2013 16:24:22 -0700
From: harvard5362@yahoo.com
To: tim.sawyer@me.com
CC: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Audio level test tone with Beagleboard xm and LOX board.

Hi
 
I made the edit to the file, however it still did not work.
 
Here is the response I got.
 
Perhaps I am not executing it from the correct place?
 
root@N6LXX-1:~# rpt fun 29876 *989
-bash: rpt: command not found
 
thank you
 
Chris
From: Tim Sawyer <tim.sawyer@me.com>
To: C B <harvard5362@yahoo.com>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Monday, August 19, 2013 3:45 PM
Subject: Re: [App_rpt-users] Audio level test tone with Beagleboard xm and LOX board.

Take the semicolon off the *989 line, restart asterisk and you'll be able to make tone.
--
Tim
:wq

On Aug 19, 2013, at 1:55 PM, C B <harvard5362@yahoo.com> wrote:

 
Hi
 
Tried to get the test tone as per some of the instructions I have read thus far.
 
I have looked at the rpt.conf file and it looks like it is set up to use *99 as it has the line in it *99=cop,6.
 
The line with *989=cop,4 had a ; (semicolon) in for of it so I assume it is disabled.
 
When I type on the CLI rpt fun 29876 *99 it does not send tone.
 
Please tell me what I have done wrong.
 
Thank you in advance for your help.
 
Chris
 
 
 
 
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users




_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users