Hi Skyler,

Not sure if you ever got a solution for this issue.  I was thinking along the lines Corey was.  If you set this node up as a traditional "Dumb" remote base, then when you go into Command Mode (*4) of that node, the remote base will not transmit.  That way you don't have to use the part of your script the enables and disables your transmitter.  Here's a overview of how to make it a traditional remote base:

rpt.conf:
[1234]
rxchannel = SimpleUSB/usb        ; Set for your receive channel / device
remote=y                         ; Set as "Dumb" node, as your script will handle the channel changes
functions=functions-remote       ; Wherever your functions live
phone_functions=functions-remote ; Wherever your functions live

[nodes] 
1234 = radio@127.0.0.1/1234,NONE,y ; Remote base node


Monty

On Tue, May 3, 2016 at 4:55 PM, Skyler F <electricity440@gmail.com> wrote:
Then I won't be able to hear the telemetry with the node that has just connected to the remote base

On Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
What about using the localplay command rather than the playback command?

On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440@gmail.com> wrote:
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.

Modifying app_rpt.c  to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.

73
Skyler KDØWHB

On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.

On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.

73
Skyler

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



--
--
Tim



--



--
--
Tim



--

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.