Use more digits in your macro numbers that you are calling up, but there are some hints...

Don't use 59, 591, 592  in macros. Switch all to 2/3/4 digits because in this case to the left *59 will always execute .( 590,591,592 correct ) - Quite quickly, you could add a zero behind all your macros but look at it and think it all the way through. I like to keep similar things grouped together with the first 2 digits.

If you describe macros that never are run manually, make them all 4/5 digits. I use *59xxx for all macros that run from the sched that I would never run manual.

Leave yourself plenty of room to expand without re-writing the plan (more digits). Then nobody needs to relearn commands because you ran out of numbers.

...mike/kb8jnm

-------- Original Message --------
Subject: [App_rpt-users] rpt.conf macro
From: "zeppelin.1@netzero.com" <zeppelin.1@netzero.com>
Date: Sun, April 13, 2014 8:53 am
To: app_rpt-users@ohnosec.org

Hello all;
            an asterisk question.
how do extend the dtmf macro option in the rpt.conf file?
currently i am using= *51......*59
 
Regards
Anton/ kc2rqr
Allstar node 29103
piRLP 4012


____________________________________________________________
The #1 Worst Carb Ever?
Click to Learn #1 Carb that Kills Your Blood Sugar (Don't Eat This!)
FixYourBloodSugar.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.