The PL setting should be half of what it is on wide band systems. So 3Hz or so should be about right.  
--
Tim
:wq

On Feb 5, 2015, at 7:46 PM, Bryan Fields <Bryan@bryanfields.net> wrote:

Thanks, how much PL/DCS deviation do you use on top of this?  This is my first 900 mhz repeater :)


On 2/5/15, 10:40 PM, Tim Sawyer wrote:
1.5khz is the setting we use on 900 radios both on the RX and TX sides. Makes sense to add that to the docs site and I’ll take care of that. 
 
--
Tim
:wq

On Feb 5, 2015, at 6:52 PM, Bryan Fields <Bryan@bryanfields.net> wrote:

I'm playing with a 900 mhz repeater and most FM on 902mhz is narrow band.   As this is a converted uniden LTR repeater it's setup for narrow band.

Looking at http://docs.allstarlink.org/drupal/node/92 which is the allstarlink network standard, rather than 3khz of deviation before CTCSS/DCS, what's the value I should be shooting for here in a NBFM system?

I've been researching it and there are some posts from 2009 by Steve, WA6ZFT saying that 1.5 KHz of deviation should be the target.
Is there anything more official than this?  Can we add some info on this to the docs site?

73's W9CR
-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.