Sounds good I am experminting in a virtualized environment here at the house before i actually try it on my big vps lol.. Dont want to disrupt much traffic today might hear about it.. Anyway I am running Debian Wheezy and was curious to the steps i see you said you compiled by source code but was it similar to this article i found here.. Below..
https://github.com/KD8EYF/squeezeterisk


THIS IS THE SOURCES FOR ASTERISK, ZAPTEL, AND OTHER RELATED FILED FOR INSTALLATION OF AN ALLSTAR NODE ON DEBIAN SQUEEZE
BUILT AND TESTING ON A CLEAN BARBONES INSTALL OF debian-6.0.5-amd64-CD-1.iso IN VIRTUALBOX 

INSTRUCTIONS
----------------------

Install debian Squeeze via debian-6.0.5-(arch)-cd-1.iso
Select "Yes" when asked "Use a network mirror?"
Deselect "Desktop Environment"
Select a network mirror close to to you
Only Selected package is "Standard system"


POST INSTALL
-----------------------
apt-get install git-core
cd /usr/src
git clone https://github.com/KD8EYF/squeezeterisk.git
./squeezeterisk/scripts/allstar-install.sh


Think i am going to try this on my test server and just see what type of error i get


On Wed, Feb 25, 2015 at 10:43 AM, Steve Zingman <szingman@msgstor.com> wrote:
Loren,
I can't speak to VPS, but I have been running a hub for quite a few years on VMware VSphere with good results. I'm running Debian 7.x and I compiled dahdi and Asterisk I don't know if you could do it with the version out of the repo, but give it a try.

73, Steve N4IRS


Hello everyone
I am looking for guidance on how to setup just an allstar hub on my vps
its running Debian 7.5 and was curious could i in theory just install the
latest dsitro of Asterisk and plug the config files in to have a system hub
the reason for this is trying to cut down on bandwidth at the repeater site
and leave that for my VPS which has plenty of bandwidth to handle just
about what ever anyone wanted to throw at it..

If there is some what a tutorial or reccomendation on how to do this please
let me know i am very interested..

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.