Thanks Corey,
I thought the same thing, however it doesn't work for nodes starting with 3. It seems to work for other numbering ranges, but not starting with 3.
Maybe I am missing something there.
Renumbering isn't a problem. It was just going to be neater if I could do it that way, that is all. I also hadn't been able to find reference to the restriction of using these numbers if creating a private linking system.
73,
Leighton
As long as you have the number node numbers defined with the IP address and port in rpt.conf and they have the forwarding setup correctly they should work just fine.
Corey. N3FE
Sent from my iPhone
> On Mar 26, 2017, at 7:13 PM, Leighton Judd <leighton.judd@gmail.com> wrote:
>
> Hi All,
>
> I have recently started experimenting with app_rpt.
>
> I am wondering if there are any restrictions on numbering of private nodes?
>
> I have set up two nodes on the same machine for a test. They are each set up as a "hub" with numbers 2222 and 3333.
>
> Using the asterisk console, I can connect successfully from node 3333 to node 2222. Trying to connect from node 2222 to node 3333 does not work. This seems to be true for node numbers, that I have tested, beginning with 3000.
>
> This connects:
> rpt cmd 3333 ilink 3 2222
>
> This doesn't connect:
> rpt cmd 2222 ilink 3 3333
>
> Does anyone know if this is intended or not?
>
> Regards,
> Leighton
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.