Thanks Mike, *99 / # worked!!! 
 
Is there a way to change *99 to something simpler, like * to transmit and # to switch back to receive?  Better yet, * to transmit and * to toggle back to receive.
 
Thanks again,
Steve_WB8GRS
 
Sent: Saturday, April 30, 2016 4:37 PM
Subject: Re: [App_rpt-users] Zoiper not Transmitting
 
The mute button is not a surrogate for PTT. If your IAX client is configured for PTT, the default to transmit is entering *99 and # to receive. If your client is configured for VOX, the mute button will keep the VOX from triggering, acting as an "allow/disallow" switch.
 
As with any VOX circuit, you pause, things unkey.

tnx
Mike / W5JR
Alpharetta GA

On Apr 30, 2016, at 4:39 PM, ssedgwick <ssedgwick@suddenlink.net> wrote:

Hi all,
 
I installed Zoiper on my Android phone and configured my node.  When I connect using Zoiper, I can hear fine on the phone, but the “mute” button won’t allow me to transmit from the phone.  I than installed Android IAXRPT on the same phone and it transmits and receives fine using the same setting that I used in Zoiper.  As a final test, I installed Zoiper on another Android phone and had the same issue, mute button won’t allow me to transmit.
 
Any idea’s?
 
Thanks,
Steve_WB8GRS
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.