Yes. All 3 nodes are running app_gps but it is only this one that is dying. I am not sure which SVN I am running? Is there an easy way to tell?
Eric - ve3ei
----- Original Message -----
From: Jim Duuuude
To: ve3ei@iescomm.ca ; app_rpt mailing list
Sent: Sunday, March 06, 2011 4:09 PM
Subject: RE: [App_rpt-users] Echolink stops working on Node 2344

Are you running app_gps???

If so, I seem to remember a similar problem which I believe can be cured with an upgrade to latest SVN

JIM

From: ve3ei@iescomm.ca
To: app_rpt-users@ohnosec.org
Date: Sun, 6 Mar 2011 14:56:21 -0500
Subject: [App_rpt-users] Echolink stops working on Node 2344

I operate 3 nodes and I have 1 node where the Echolink App stops working. There seems to be an error in the program probably causes by something not configured correctly. Here is the printout
 
[Mar  6 10:58:00] NOTICE[27395] chan_echolink.c: Received OK from Echolink server server1.echolink.org
[Mar  6 10:58:00] NOTICE[27397] chan_echolink.c: Directory pgm done downloading(partial,compressed), 109 records
[Mar  6 10:59:27] ERROR[27396] chan_echolink.c: Error in select()
[Mar  6 10:59:27] ERROR[27396] chan_echolink.c: Exiting chan_echolink, FATAL ERROR!!
[Mar  6 10:59:27] NOTICE[27395] chan_echolink.c: Echolink registration thread exited.
[Mar  6 10:59:28] NOTICE[27397] chan_echolink.c: Echolink directory thread exited.
[Mar  6 10:59:28] WARNING[27389] app_rpt.c: rpt_thread restarted on node 2344
[Mar  6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 .
[Mar  6 10:59:28] WARNING[28625] chan_usbradio.c: Unable to re-open DSP device 1 (usb2344): Device or resource busy
[Mar  6 10:59:28] WARNING[28625] chan_usbradio.c: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 .
[Mar  6 10:59:29] WARNING[28624] chan_usbradio.c: Possibly stuck USB read channel. [usb2344]
[Mar  6 10:59:29] WARNING[28624] chan_usbradio.c: Nope, USB read channel [usb2344] wasn't stuck after all.
[root@Asterisk-ve3yyz asterisk]# [Mar  6 10:59:27] ERROR[27396] chan_echolink.c: Error in select()
It looks like the error is in the select portion of chan_echolink.c
 
Anyone run into this error before?
 
Eric Meth - ve3ei
Node 2344, 2425, 2579, 2593, 27135

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users