Yeap, I was the one that brought that up several months ago, but I never could figure out how to “make / make install” .
I have no clue what that means.. If someone could help me out with that, I will finally get this to 1200 MS which will cover my Yasue radios.
Thanks!
KA4EPS
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ken
Sent: Saturday, December 24, 2011 9:02 PM
To: 'Jim Duuuude'; w7ry@centurytel.net; 'app_rpt mailing list'
Subject: Re: [App_rpt-users] CTCSS Drop Out Time
Notone AKA chicken burst gives you carrier with no tone at the end.
But some radios are too slow in closing the CTCSS and still make noise.
There was a posting on here a while back that pointed the time delay in:
/usr/src/asterisk/asterisk/channels/xpmr/xpmr.h
The default is 600 ms. Some radios might be slower than this.
You could change (increase) it, then make / make install and restart asterisk.
My Alinco DR-?35 series seem to want to give you a small squelch tail no matter what you do, however…
73
Ken
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude
Sent: Saturday, December 24, 2011 6:17 PM
To: w7ry@centurytel.net; app_rpt mailing list
Subject: Re: [App_rpt-users] CTCSS Drop Out Time
try
txtoctype = notone
in usbradio.conf
JIM WB6NIL
From: w7ry@centurytel.net
To: app_rpt-users@ohnosec.org
Date: Sat, 24 Dec 2011 13:55:51 -0800
Subject: [App_rpt-users] CTCSS Drop Out Time
Anyone know if there is an adjustment of the time the transmitter stays keyed, and the PL tone drops out and where that setting is?
With my rigs, I still here the squelch crash after the repeater drops out. I would like to cut the PL off a little sooner or delay the transmitter a little longer.
BTW, I'm all up and running with the repeater function and the node! Thanks to all that helped me get past the learning curve!
Thanks!
Merry Christmas
73 Jim W7RY
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users