Hi
I think the when it told the online config that I was a node only it changed that to the requested
rxchannel = Zap/pseudo
there repeating error messages in the "messages file"
[Aug 25 10:43:26] ERROR[2458] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
[Aug 25 10:43:31] ERROR[2568] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
[Aug 25 10:43:35] ERROR[2574] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
[Aug 25 10:43:31] ERROR[2568] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
[Aug 25 10:43:35] ERROR[2574] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
After recompiling again the same problem exists
[Aug 25 10:43:26] ERROR[2458] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
[Aug 25 10:43:31] ERROR[2568] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
[Aug 25 10:43:35] ERROR[2574] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
[Aug 25 10:43:31] ERROR[2568] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
[Aug 25 10:43:35] ERROR[2574] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
I have re-downloaded the ACID ISO twice and re-installed several times.
Any help appreciated.
Chris
From: Ken <ke2n@cs.com>
To: 'C B' <harvard5362@yahoo.com>; app_rpt-users@ohnosec.org
Sent: Monday, August 26, 2013 4:42 AM
Subject: RE: [App_rpt-users] Asterisk ended with exit status 1
To: 'C B' <harvard5362@yahoo.com>; app_rpt-users@ohnosec.org
Sent: Monday, August 26, 2013 4:42 AM
Subject: RE: [App_rpt-users] Asterisk ended with exit status 1
Can you configure it to use the “pseudo” channel?
In your rpt.conf file change the rxchannel statement from Radio/something to:
rxchannel = Zap/pseudo
Do this for all nodes if you have more than one.
If this works, then the problem may still be some hardware/firmware issue having to do with the USB ports.
If it continues to fail, then it probably is some strange software issue.
I wonder if something interesting shows up in /var/log/asterisk/messages
GL
Ken
From: C B [mailto:harvard5362@yahoo.com]
Sent: Sunday, August 25, 2013 5:52 PM
To: Ken; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
Sent: Sunday, August 25, 2013 5:52 PM
To: Ken; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
Hi
Updated BIOS to latest and no help.
Chris
From: Ken <ke2n@cs.com>
To: 'C B' <harvard5362@yahoo.com>; 'Paul J. Agamata' <Sysman@Xceptions.COM>; app_rpt-users@ohnosec.org
Sent: Sunday, August 25, 2013 11:27 AM
Subject: RE: [App_rpt-users] Asterisk ended with exit status 1
To: 'C B' <harvard5362@yahoo.com>; 'Paul J. Agamata' <Sysman@Xceptions.COM>; app_rpt-users@ohnosec.org
Sent: Sunday, August 25, 2013 11:27 AM
Subject: RE: [App_rpt-users] Asterisk ended with exit status 1
Maybe your PC needs a BIOS update …
Not saying you have this *particular* issue,
but if yours is an older one, it might be worth a try…
73
Ken
From: C B [mailto:harvard5362@yahoo.com]
Sent: Sunday, August 25, 2013 2:11 PM
To: Paul J. Agamata; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
Sent: Sunday, August 25, 2013 2:11 PM
To: Paul J. Agamata; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
Hi
I did what you suggested and it seems to complete without error.
However it did not resolve the problem.
I ran the same commands for
Asterisk, still the same issue.
Reran the Zaptel compile / install again and still no luck.
I re-downloaded for the allstarlink.org the ISO for ACID in case what I downloaded originally was corrupt.
after reinstalling I looked at the /root/acidinstall.log and I did not see anything that looked like an error.
Am I forgetting something or could my hardware not be combatable?
As part of this project I did install this successfully on a different computer.
Any help greatly appreciated.
Chris
From: Paul J. Agamata <Sysman@Xceptions.COM>
To: C B <harvard5362@yahoo.com>
Sent: Saturday, August 24, 2013 4:57 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
To: C B <harvard5362@yahoo.com>
Sent: Saturday, August 24, 2013 4:57 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
Log into your 'root' account and navigate to the 'zaptel' directory.
When your in there type the following:
./configure <enter>
make <enter>
make install <enter>
Then reboot your computer and everything should be fine.
_______________________________
Paul J. Agamata
WH6FM
From: C B <harvard5362@yahoo.com>
Reply-To: C B <harvard5362@yahoo.com>
Date: Saturday, August 24, 2013 1:54 PM
To: Paul Agamata <Sysman@Xceptions.COM>
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
Reply-To: C B <harvard5362@yahoo.com>
Date: Saturday, August 24, 2013 1:54 PM
To: Paul Agamata <Sysman@Xceptions.COM>
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
Paul
Please excuse my lack knowledge here, I am very unsure of the compile / install procedure you are speaking of.
is there anything you can refer me to that will contain instructions on how to do this?
Is it something I did wrong?
Sorry for not having a lot of experience.
And thank you for your help.
Chris
From: Paul J. Agamata <Sysman@Xceptions.COM>
To: C B <harvard5362@yahoo.com>; "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Saturday, August 24, 2013 4:46 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
To: C B <harvard5362@yahoo.com>; "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Saturday, August 24, 2013 4:46 PM
Subject: Re: [App_rpt-users] Asterisk ended with exit status 1
This is indicative of the zaptel drivers not in your kernel. Compile/Install then reboot and all should be well. The 'zaptel' directory is in the 'asterisk' source directory.
Be aware that if you update your kernel you will need to re-install the zaptel
modules.
Regards,
Paul
From: C B <harvard5362@yahoo.com>
Date: Saturday, August 24, 2013 1:23 PM
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Asterisk ended with exit status 1
Date: Saturday, August 24, 2013 1:23 PM
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Asterisk ended with exit status 1
Hi
I am attempting to build a ACID node.
After several attempts of reinstalling the ACID with the same results I
am asking for some help.
All seems to complete normally, I download the configuration, reboot and the following error message keeps repeating.
mpg123: no process killed
Asterisk ended with exit status 1
Asterisk died with code 1
Automatically restarting Asterisk
Computer is a HPdc5700 small form factor
1 GIG memory
500 GB SATA HDD
than you in advance for any help
Chris