The RTCM will have longer squelch tails on weak signals or quick keys. Be sure to set the squelch at least 3 full turns above threshold. You want it to be around 350 or more on status menu 98. That will help. 

Not sure if Chuck squelch will help. If you try it please post your results.  

On Mon, May 1, 2017 at 1:38 PM, Pierre Martel <petem001@gmail.com> wrote:
Always wanted to "play" with voting system and maybe simulcast. My primary site is on a wireless network that belong to a ham friend and he provide me with the bandwith and I use some IP in the 44.xxx.xxx.xxx range.

He have a site where I could install a voting receiver. And I have a site where I could simulcast. the computer at the main site will be changed in the next few wek to a proliant dl320 g5p with 8 gig of ram and 3 tb of hard disk. It will run Dial and Xen, cause I want to virtualize some service for our Mesh. ( web and file server. asterisk for local mesh voip. and stuff like that. 

Anyone built there own voting board? 

I made many pc board in my life and want to maybe make a few to test all this. 

Is there some gerber or SCH files available to build a voter board?

2017-05-01 12:28 GMT-04:00 Lee Woldanski <ve7fet@tparc.org>:
Hi James,

Chuck Henderson, WB9UUS, made a couple modifications to the code... one I believe actually fixes a bug in how the RSSI is calculated (which is probably your issue), and the other changes squelch action.

A previous thread here:


If you look in the source code, you can find the specific changes:



The predominant issue here was even if the received signal was full-quieting, if it was a short transmission, it could cause a long squelch tail.

As for how the RSSI is calculated... if you look at the RSSI in Allmon, without this patch, you'll see the RSSI level jumping all over the place, especially on noisier signals. With the patch, things are much more stable.


Firmware images with and without the patch enabled are available on the repository for you to try out. They should be there for all hardware flavors:


If you are using a MicroNode RTCM, you will likely want the "SMT V1.5 Chuck" file.



Lee

On Mon, May 1, 2017 at 8:18 AM, James Cizek <james.m.cizek@gmail.com> wrote:
Firmware version 1.50

I guess I am not familiar with a "Chuck squelch patch" so am guessing that I am not running it!  Can you help point me to information?

Thanks!

James


Date: Mon, 1 May 2017 08:11:40 -0700
From: Lee Woldanski <ve7fet@tparc.org>
To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org>
Subject: Re: [App_rpt-users] Squelch issue with RTCM and Kenwood
Message-ID:
        <CACaEaZ=oKYbY16wAZQeGTNieQ-kGAGQs=zHyGemPMjUAt3hSKg@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi James,

What firmware are you running in the RTCM's? And are you running firmware
with the "Chuck Squelch" patch enabled?


Lee


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



--
Lee Woldanski, AScT
VE7FET

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



--
--
Tim