Geoff,
You have it correct. If you try to run radio-tune menu as user repeater, you do get the error. Running it with sudo radio-tune-menu works. The user repeater does have sudo privileges, which allow you to run a command with elevated rights.
If you do not want to have to type sudo, you can either run sudo -s or set the root password (which is NOT set by default) and then use su.

73, Steve N4IRS
 

On 3/28/2018 8:00 AM, ARS W5OMR wrote:
In my case, it was a permissions issue.
User 'repeater' is supposed to have sudo (sudo -l) rights, but every time I tried to enter a command on ASL 1.01, it had to be proceeded with 'sudo'.

Try 'sudo radio-tune-menu' and see what happens.

73
W5OMR

On Wed, Mar 28, 2018, 00:29 John Rudolph- N2YP <John@n2yp.com> wrote:
I'm at a loss. I upgraded my Dial system to the new All Star Link 1.0 and am have a few issues. When I try and run radio-tune-menu I get

root@N2YP_Rogers_Knob:~# radio-tune-menu
Error parsing device parameters

I've read through past messages and checked that chan_usbradio was the active one in modules and that simple USB was set for no load. Also as of right now my nodes load with the URI's and sort of function as they are. Even when no radios are hooked up they lockup in "transmit" mode. I've tried rebooting the system and any other suggestions I could find with no luck. I've tried with both new and old conf files with no success.
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.